u/LtNoyan

I realised that my 3rd brake light was not working. When I checked I found out that there was not a socket on the LED (just the 2 wires sticking out) nor the socket to plug the LED. Can anyone who has experience tell me where to find the missing wires? One wire on the LED is white with a green stripe and the other one is plain white. I checked under the headliner and there were two sockets coming from hatch harness into the hatch boot. There are 5 wires in there which belong to the defog and wiper motor. Pls help :|

So a little backgorund, I had a CEL one of the codes was related to bank 2 vvt solenoid and the other one was ign primary circuit. I had no misfires and I checked the ignition coil resistances and cleaned the vvt solenoids so I thought the problem could be the camshaft position sensor on bank 2. I replaced it and fired up the car and took it for a drive no problem. After 10 mins of driving I came back home and the car was misfiring. I turned it off and started it back up it kept misfiring with a CEL this time. I tried the idle relearn and the ecu reset but nothing is working. Any help?