Login

u/MOLKAMP

r/makerworld r/aestheticprints
▲ 36 r/aestheticprints

I designed an upright tissue box with a little tray for the things that end up next to it

I wanted a tissue box that I’d actually enjoy having on display, so I designed TissueRise: an upright holder with a ribbed front, an asymmetric accent frame, and a small tray for rings, coins, or whatever ends up on the bedside table.

The tissue carton goes in through the back, behind a magnetic lid. It prints in four parts without supports, and the colours come from separate pieces, so no AMS is needed.

I sized it around the Amazon own-brand tissues I use. The internal space is 120 × 230 × 80 mm (W × H × D), so other cartons can work too—just check the dimensions and leave a little clearance.

Would you go with the beige and olive combination, or keep it all one colour?

Link:
https://makerworld.com/models/3385071?appSharePlatform=copy

u/MOLKAMP — 13 days ago
▲ 18 r/aestheticprints

I designed FloatRoll — a minimalist paper towel holder in two sizes

Ich wollte einen Papierhandtuchhalter, der auf der Küchenarbeitsplatte gut aussieht. Deshalb habe ich FloatRoll mit einem offenen Rahmen und schwebender Optik entworfen.

Er ist in zwei Größen erhältlich: Standard für Rollen bis zu 115 mm Durchmesser und XL für Rollen bis zu 145 mm. Beide Versionen bestehen aus drei Teilen, die zusammengeschraubt werden. Dank des Griffs oben lässt er sich auch mit eingelegter Rolle tragen.

Was haltet ihr vom Design?

Link:

https://makerworld.com/models/3363741?appSharePlatform=copy

u/MOLKAMP — 18 days ago
▲ 46 r/aestheticprints

I designed a home for my keys and mail — two colors, no AMS needed

Keys on the table, mail on the counter… I wanted to give them a place of their own, so I designed LineDock.

It’s a wall-mounted organizer with a compartment for mail, a small shelf on top, and five key hooks. I went with rounded edges and clean lines to make it something I’d enjoy seeing by the front door.

There are two ways to print it:

Want two colors? Print the hooks separately in a contrasting color, then screw them into the body. No AMS needed.
Prefer the simplest setup? Print everything in one color as a single piece, with the hooks already built in. Just print and mount.

Both versions print without supports.

I like the little bit of contrast from the separate hooks, but there’s something satisfying about printing the whole thing in one go, too. Which would you choose?

Link:
https://makerworld.com/models/3324176?appSharePlatform=copy

u/MOLKAMP — 27 days ago
▲ 31 r/aestheticprints

I designed this ribbed Nespresso capsule dispenser with a removable insert for smooth gravity feeding

The capsules automatically slide forward for easy access, while the removable insert helps ensure smooth and reliable feeding. It can also be used without the insert for maximum capacity. The ribbed design turns practical coffee storage into a real kitchen centerpiece.

https://makerworld.com/de/models/3144492-ribbed-dual-nespresso-capsule-dispenser#profileId-3550880

u/MOLKAMP — 2 months ago
▲ 33 r/makerworld

I designed this ribbed Nespresso capsule dispenser with a removable insert for smooth gravity feeding

The capsules automatically slide forward for easy access, while the removable insert helps ensure smooth and reliable feeding. It can also be used without the insert for maximum capacity. The ribbed design turns practical coffee storage into a real kitchen centerpiece.

https://makerworld.com/de/models/3144492-ribbed-dual-nespresso-capsule-dispenser#profileId-3550880

u/MOLKAMP — 2 months ago