
My best 5 shot group so far.
Now I need to play with seating depth to see if I can get below the half inch mark. This is probably only possible since the bolt is on the left. /s

Now I need to play with seating depth to see if I can get below the half inch mark. This is probably only possible since the bolt is on the left. /s
Sorry for the wrong terms.
I took the p trap off, it is clear. I snaked out this main black pipe, I also removed the drain cap you can see just behind the blue bottle and snaked out inside there. A little gunk came out. The drain is still plugged somewhere further in than I can get. Is it time to buy the stuff with acid in it or call a plumber?
If I could ID where the block was this may fall on the trailer park to fix.
Good evening. I over flared the 44 cases and now they dont fit into the seating die. Can I use a 45 die to try and take some of the flare off so it fits back into the 44 full size die? I can then resize and re expander die after.