u/Nocturnalbust

My first ever greenhouse, and I love a project so I want to make it as nice as I can. Will add diagonal supports between the vertical posts made of 10-12mm round steel rods, so that the glass can be uninterrupted from the foundation wall to the top of the roof.

Was a lot of work since I excavated all the way down to the rock beneath, built the base up with bricks and then filled it to level with rocks. Going to plaster/stucco the base.

The rear wall will be half glass half wood unlike the drawing, I also will leave the floor plan bare and not make the soil walls to have it more modular and flexible. Slow progress because I’m doing it on my free time and winter in Sweden is cold.

Any tips?

Okay so I bought a used lift3 e-foil exactly one week ago and the first time it worked great for me, but my heavier friend was complaining it lost motor power. I kept going but on the third use I noticed the same thing. At first it would start then the power button flashed blue and shut off, seemed like the e-box and battery couldn’t communicate.

I took it home and dried everything off, cleaned all connectors. Later when I tried starting it up it started normally, controller connected but when I pressed the remote the propeller just stuttered in place. Restarted it and it worked for maybe 2 seconds and then more stuttering.

Anyway I ended up opening the e-box and there is a puddle in there, silica packs are fully moist. For now I’ve emptied it and am currently drying it out. Can’t see any damage on the circuit board but I am still worried. Do you guys think there’s hope?

I’ll dry it out for the next 48 hours and see, then contact the seller if it still has issues.