From my research and from ChatGPT this is what I've gathered. Can anyone verify all this?
| Model Years | No Tow Package | Tow Package |
|---|---|---|
| 2007–2010 | Coolant-to-ATF heat exchanger on transmission | External air to oil stacked-plate cooler |
| 2011–2018 | Condenser-integrated cooler | Condenser-integrated cooler |
| 2019–2021 | Coolant-to-ATF heat exchanger on transmission | Coolant-to-ATF heat exchanger on transmission |
I've researched a few parts to add a "tow package" to the 4.6L trucks. (apparently it was optional on these smaller-engined trucks so a "factory kit" could be constructed)
Has anyone done this and can they confirm these are the correct parts? (other than the cooler itself)
I've added a 5.7L "tow package" to my 2019, but it appears the 4.6L uses all different part numbers than what I ordered for my 5.7L.
| 32907-0C040 | oil cooler pipe 2010-2013 Tundra |
|---|---|
| 32971-34030 | trans cooler thermostat 2010-2013 4.6l with tow package |
| 32941-0C040 | inlet hose 2010-2013 |
| 32942-0C050 | Outlet hose 2010-2013 |
| 90080-10400 | (2) flange bolts |
| 90466-A0014 | (8) hose clamps |
I've read after mid 2011 through 2022, Sequoias didn't have a transmission cooler. Even if it said it has one on the build sheet, it only refers to the 'hockey puck' heat exchanger mounted to the transmission itself which isn't really a great 'cooler'.
Does anyone have a 2012-2022 Sequoia with a trans cooler in the condenser or external cooler as part of some tow package? I've seen some people say theirs does but maybe they are referring to the hockey puck as mentioned above or a special package.
From 4140 steel black oxide coated.
Still need to finish weld, grind, sand, send to powdercoat.
Modular 3 piece design I installed it myself without help.
4140 steel black oxide coated works with drill or impact
Does anyone know if a 2nd gen tow hitch is the same as a 2.5 gen?
Working on a rear bumper project and don't want to disassemble my rear bumper and break clips.
Found a local part-out 2008 truck. Need to verify tow hitch fits underneath my steel bumper for a buddy.
The Toyota part# is the same for 2007-2017 but what about 2018+? I'll just try it and see.
Surprise hailstorm hit my truck, windshield is intact but dented every panel on driver's side along with hood and roof pretty bad. Pictures don't look as bad.
2019 5.7 4x4 double cab with 31k miles, previous owner has a fender bender on the record. Last pic is before the hail.
My 2005 Tundra is totaled parked 1 mile away along with likely my dad's 2018 both have cracked windshields and higher mileage.
*Edit* I was kinda hoping to buy it back and swap the hood myself and keep driving it, but sounds like its not totaled and I'll have to wait about a year for the PDR guy to do his thing.
