u/Realistic_Debt9526

Klippy log: https://drive.google.com/file/d/1ndYTY3QetjzHdroyKgqEDfRYxPE6WddD/view?usp=sharing

I am running a BTT SKR Mini E3 V3 and a BTT Pi 1.2

Thanks for any help!

Hello, just looking for some honest feedback on my L1 rocket before I get to building it. It is a BT-80 diameter rocket. The entire fin can (fins and centering rings) is built with 3mm thick balsa wood epoxies together, and I am planning on 3d printing the nose cone. Everything but the nose cone and transition will also be fiberglassed.

Edit: I do need some clarification on these rules for the certification, do these just mean I have to meet just one of these four requirements?

2. Junior High Power Level 1 Participation certification is required to:

1. Launch rockets containing multiple motors with a total installed impulse of 320.01 Newton-seconds to 640 Newton-seconds, or
2. Launch rockets containing a single motor with a total installed impulse of 160.01 Newton-seconds to 640 Newton-seconds, or
3. Launch rockets that weigh more than 53 ounces (1500 grams), or
4. Launch rockets powered by motors not classified as model rocket motors per NFPA 1122, e.g.:
   1. Average thrust in excess of 80.0 Newtons
   2. Containing in excess of 125 grams of propellant and are limited to only H and I motors

This is for my L1 certification rocket. The motor that I have chosen is the H115DM. I am wondering if my motor retaining system will work if the retainer is printed out of PETG. Thanks!

Also I am well aware my motor CAD is way off