u/Sea_Razz

***SOLVED! When I tilted back I must have kicked the control patter selector (which is oddly located by your heel when seated) It was maybe five degrees off the CAT control setting. This allowed only the functions that were the same between CAT and SAE to work. So the tilt alarm was unrelated to the issue. Thanks again for all your help.***

Hello all. I'm renting this bobcat e20 and it gave a tilt alarm and locked me out of the controls. I could easily get myself out of this if I could just USE THE CONTROLS. Does anyone know of an override? And is this a safety feature or am I experiencing something else entirely.

PS The User Manual is $60 so I thought I'd ask you good people first. Thanks in advance.

***Forgot to mention: the tracks still work and the cab still rotates (left controller left and right) and the bucket can still go in and out (right controller) but the boom and arm itself is not moving.

Hello all!

I am trying to run wire for this electric oven (FFSGS6125-30) in a new residential build with open walls. I am confused about what wire to use. Under “service” it says “2/c 8AWG+2/c 10AWG.” What does that mean.

The recommended receptical is a "four-prong grounding type," which I believe takes three conductors plus ground. So is the wire I need 8-3 or 10-3?

Oven is rate at 3.6kW “Max connected load." What size double pole breaker. 30 or 40 amp? (3,600/120=30) Is there any harm in sizing up?

*Further context: I live in a very rural area with one electrician. He is not available for months and I don’t want to pay him $300/hr to drill holes and pull wire anyhow. I need to close up this wall soon.

Thanks in advance!