u/Sufficient_Hour4874

Is this overextrusion or is my filament moist?

Hi i recently got a Bambu lab A1 mini and i tried printing using the panchroma pla matte. I repeated this print twice already and i get the same problem. I found some layer lines and blobs. Im not sure if its poor layer adhesion too. I just started 3d printing and want to know where i got it wrong

Printer Model: A1 Mini
Slicer: Bambu Studio
Nozzle temp: 220
Bed temp: 60

I used grid infill at 20% and 5 wall loops. Outer wall speed at 200 mm/s and inner wall speed at 350 mm/s

u/Sufficient_Hour4874 — 5 days ago

▲ 20 r/BambuLabA1mini

I’m a rookie in 3d printing and my print has stretch marks on the first layer 🫩

Hi! Recently got an A1 mini w/o ams. Im printing a grid organizer and stretch marks/ rough lines appeared on my first layer. Stopped the print and tried to lower the nozzle temp but nothing changed. I used settings of 0.16 mm high quality using pla matte. Cleaned my bed as well. Can someone help me to understand what leads to this? TYIA

u/Sufficient_Hour4874 — 8 days ago