I made a post earlier today and now after repasting, I want to know if this is good or what should be changed before applying the heatsink, the paste is thermalright tfx on the cpu and gpu core and the vrms and vram cores have halnziye hy206 thermal putty, I changed around to having putty blobs on the vrams and vrms for when I push down the heatsink, same goes with the paste by putting dots
I’ve been dealing with this issue forever now but my laptop just always now overheats and shutdowns after playing a game for 5 minutes despite repasting many times unless I’m doing something wrong, I switched to thermalright tfx paste too for the gpu and cpu but nothing has worked, I screwed in the heatsink properly and I even turned off turbo boost but it still creeps up to 90+ degrees and shuts down, I don’t know what could be the issue at this point.
The picture above is the laptop after its recent pasting today before cleaning up the smudges around the chips and mess
I just repasted my laptop recently and I screwed in the heatsink in the criss cross order from 1-10, is it normal that my laptop should be doing this or not since it’s getting between 45-56 degrees c on idle and my fps works in games but I’m wondering if this will stop or if I did something wrong
Laptop is a MSI Cyborg 15 A12VF
Is there anyway to help remove this screw from the heat sink since I’m trying to repaste my gpu and cpu and cores but this screw wouldn’t come loose and I forced it too hard to now be stripped, is there any way to get it out? I have the screwdriver needed for this
I’ve been testing my laptop to see if its thermal throttling now to get new thermal paste but I see only this category that says “Yes” for many minutes now, as well as my first 4 cpu cores going up from 1000-2000 MHz to 4000-4500 between different seconds, should this be a cause of concern to now get new thermal paste?