u/Trzebiat

Just a small part of my Beretta collection.

950 Jetfire (.25 ACP), M1934 (9mm Short), 84F Cheetah (9mm Short), 8045 Cougar (.45 ACP), 96 Inox (.40 S&W). 9mm: Px4 Storm Subcompact, Px4 Storm Inox (full size), 93R Raffica, 92G Centurion Tactical (Centurion), 92FS Inox (full size), 92X Performance (Brigadier), 92F long slide, 92FS 185mm barrel Competition Kit.

Released in 1995, shortly before TM released their Desert Eagle .50AE.

TM Gen 2 M9.

• Samurai Edge Hi-Grade slide and grips
• Umbrella Albert W. 01P frame
• LP stainless steel barrel
• custom made extended mag release
• frame and lower controls painted with RAL 9006 acrylic paint

WE Gen 2 M9 with LP steel slide, RGW cut down steel barrel, FCW Leon comp. Two tone screen matched including grips damage.

WE Gen 2 M9 with LP steel slide, RGW cut down steel barrel, FCW Leon comp. Two tone screen matched including grips damage.

Western Arms Beretta M92FS Score Master limited edition from 2004.

A custom variant of the M92FS Competition model.

Also uses HW slide and frame, longer inner barrel, fixed hop-up, extended mag release and by default comes with the same wood grips with medallions (I replaced them with KSD grips).

Custom specification includes flat hammer spring cap (instead of adjustable hammer spring tension), more aggressive looking barrel weight with matte finish, removed front sight from the slide, 3-dot (instead of black out) sights, rail adapter, silver hammer, silver thin trigger and Elite magazine with large baseplate and without N.L.S.

Western Arms Beretta M92FS Score Master limited edition from 2004.

A custom variant of the M92FS Competition model.

Also uses HW slide and frame, longer inner barrel, fixed hop-up, extended mag release and by default comes with the same wood grips with medallions (I replaced them with KSD grips).

Custom specification includes flat hammer spring cap (instead of adjustable hammer spring tension), more aggressive looking barrel weight with matte finish, removed front sight from the slide, 3-dot (instead of black out) sights, rail adapter, silver hammer, silver thin trigger and Elite magazine with large baseplate and without N.L.S.

Western Arms Beretta M92FS Competition Deluxe Edition from 2003-2004.

Based on the 185mm Competition Conversion Kit - long barrel with machined aluminum counterweight, barrel bushing and barrel nut, adjustable rear sight. HW slide and frame with matte black paint finish. Extended mag release, longer inner barrel, fixed hop-up.

M92FS Competition model (both Standard Edition with plastic grips and Deluxe Edition with wood grips) is the only one that allow to adjust hammer spring tension with a screw in place of the lanyard loop. It's also one of few models with fixed hop-up for increased precision at close range.

Western Arms Beretta M92FS Competition Deluxe Edition from 2003-2004.

Based on the 185mm Competition Conversion Kit - long barrel with machined aluminum counterweight, barrel bushing and barrel nut, adjustable rear sight. HW slide and frame with matte black paint finish. Extended mag release, longer inner barrel, fixed hop-up.

M92FS Competition model (both Standard Edition with plastic grips and Deluxe Edition with wood grips) is the only one that allow to adjust hammer spring tension with a screw in place of the lanyard loop. It's also one of few models with fixed hop-up for increased precision at close range.

One of my favorite and most customized Beretta builds - Nova Wilson Combat Beretta 92G Centurion Tactical.

• Tokyo Marui Gen 2 M9 base
• Nova CNC aluminum Wilson Combat 92G Centurion Tactical kit (slide, frame, barrel, fluted guide rod, mag guide, sights)
• Nova steel checkered oversized mag release
• Nova steel Elite II skeletonized hammer
• Nova steel Wilson Combat low profile safety
• Wilson Combat Ultra Thin Gray/Black G10 grips
• Beretta Billenium Blued Allen grip screws
• Beretta Xtreme S trigger
• Beretta Xtreme S trigger bar
• Beretta trigger spring
• Beretta 92X Performance disassembly latch
• Samurai Edge extended slide release
• Toni System dovetail optic mount
• Vector Optics "totally not SRO" Frenzy Multi Reticle
• FCW Leon compensator
• WE 902 90-Two 17rd style mag baseplate
• PDI Palsonite 6.01 97mm inner barrel
• Guarder Enhanced M9A1 nozzle
• Dynamic Precision nozzle valve
• Nineball Dyna piston head
• Nineball hammer spring
• RCC 130% recoil spring
• Nineball gas routers

Western Arms Beretta M1934 Vintage from 2012.

Carbon Black HW slide and frame, metal outer barrel and grips. Beautiful Vintage finish. Markings are of an Italian military version (with Italian Royal Army proofmark on the frame) in 9 Corto (9mm Short / .380 ACP) made in 1936, though the serial number 864870 indicates a 1941 production, for 1936 it should be in 508000-555000 range. WA also made another model with that same serial number but correct 1941 production date and different proofmarks, they also made a version with Romanian markings (Cal. 9 Scurt, 1941 production) with a different serial number pattern. As this M1934 Vintage is a version with one of the premium finishes it doesn't have a big notice about licensed trademarks on the right side of the slide which is really nice. Grips have the old Beretta logo.

It's Single Action Only and has pivoting trigger. Uses WA SCW high-spec transfer hammer system which allows to manually lower the hammer completely when there's still gas in the mag unlike most GBB pistols. It doesn't lock back on empty like the real gun which locks on the magazine follower. Really cool little gun.

Western Arms Beretta M1934 Vintage from 2012.

Carbon Black HW slide and frame, metal outer barrel and grips. Beautiful Vintage finish. Markings are of an Italian military version (with Italian Royal Army proofmark on the frame) in 9 Corto (9mm Short / .380 ACP) made in 1936, though the serial number 864870 indicates a 1941 production, for 1936 it should be in 508000-555000 range. WA also made another model with that same serial number but correct 1941 production date and different proofmarks, they also made a version with Romanian markings (Cal. 9 Scurt, 1941 production) with a different serial number pattern. As this M1934 Vintage is a version with one of the premium finishes it doesn't have a big notice about licensed trademarks on the right side of the slide which is really nice. Grips have the old Beretta logo.

It's Single Action Only and has pivoting trigger. Uses WA SCW high-spec transfer hammer system which allows to manually lower the hammer completely when there's still gas in the mag unlike most GBB pistols. It doesn't lock back on empty like the real gun which locks on the magazine follower. Really cool little gun.

Western Arms Lethal Weapon and Die Hard Berettas with serial numbers matching screen used guns.

WA M92FS Lethal Weapon Battle Damage from 2011-2013 equipped with extended slide release and shorter checkered mag release. Full USA markings with serial number BER016436Z matching screen used US made Beretta 92FS from Die Hard 2 and Lethal Weapon 2, 3 and 4.

WA M92FS Die Hard 2 Black Dye, St. Valentine's Special limited edition from 2012: 25 pieces made. This model came with regular slide release so it was changed to extended one taken from M92FS Die Hard CB model from 2011. Full Italy markings with serial number C49573Z matching screen used Italian made Beretta 92F from the first Die Hard and Lethal Weapon (though the markings are of 92FS imported by Beretta and not of 92F imported by Berben Corporation N.Y.).

I got that Die Hard model from Japan for just 6k Yen which is insanely cheap considering how unique it is. For context to fully understand - most WA M92FS models have regular Italy rollmarks with omitted "Made in" on the right side and "Made in Japan by Western Arms, ASGK." in place of importer marking on the left side, while full markings are engraved which makes them look much better and are also correct to real steel version. Out of over 140 unique WA M92FS models only 7 have full Italy markings and only 4 of those have that specific serial number:

• Die Hard 2 Battle Damage from 2012, small first batch and limited: 6 pieces second batch
• Die Hard 2 Black Dye from 2012, limited: 25 pieces
• LEON Silencer ReBORN Black Dye from 2013, limited: 11 pieces
• Die Hard Battle Damage DX (with extended slide release and checkered mag release) from 2015, limited: 3 pieces

Western Arms Lethal Weapon and Die Hard Berettas with serial numbers matching screen used guns.

WA M92FS Lethal Weapon Battle Damage from 2011-2013 equipped with extended slide release and shorter checkered mag release. Full USA markings with serial number BER016436Z matching screen used US made Beretta 92FS from Die Hard 2 and Lethal Weapon 2, 3 and 4.

WA M92FS Die Hard 2 Black Dye, St. Valentine's Special limited edition from 2012: 25 pieces made. This model came with regular slide release so it was changed to extended one taken from M92FS Die Hard CB model from 2011. Full Italy markings with serial number C49573Z matching screen used Italian made Beretta 92F from the first Die Hard and Lethal Weapon (though the markings are of 92FS imported by Beretta and not of 92F imported by Berben Corporation N.Y.).

I got that Die Hard model from Japan for just 6k Yen which is insanely cheap considering how unique it is. For context to fully understand - most WA M92FS models have regular Italy rollmarks with omitted "Made in" on the right side and "Made in Japan by Western Arms, ASGK." in place of importer marking on the left side, while full markings are engraved which makes them look much better and are also correct to real steel version. Out of over 140 unique WA M92FS models only 7 have full Italy markings and only 4 of those have that specific serial number:

• Die Hard 2 Battle Damage from 2012, small first batch and limited: 6 pieces second batch
• Die Hard 2 Black Dye from 2012, limited: 25 pieces
• LEON Silencer ReBORN Black Dye from 2013, limited: 11 pieces
• Die Hard Battle Damage DX (with extended slide release and checkered mag release) from 2015, limited: 3 pieces

Top: WA Wilson Tactical Supergrade All Black

• 2010-11 End-year and New Year Special: Limited Edition 28 pieces
• SCW3, fixed hop barrel
• HW slide and frame with fluoropolymer coating, black finish
• HW starburst grips
• serrated mag release
• old style slide top serrations (some pieces of this batch got newer style flat top serrations and serrated back of the slide)

Bottom: WA Wilson Combat Tactical Supergrade

• 2006 release
• SCW2, variable hop barrel
• HW slide and frame with fluoropolymer coating - black slide and blue-grey frame finish
• checkered mag release
• lost wax cast hammer, sear and disconnector with factory custom tuning
• black nickel plated inner barrel
• stock wood-grain plastic grips replaced with Wilson Combat French walnut double diamond grips with two tone medallions

Top: WA Wilson Tactical Supergrade All Black

• 2010-11 End-year and New Year Special: Limited Edition 28 pieces
• SCW3, fixed hop barrel
• HW slide and frame with fluoropolymer coating, black finish
• HW starburst grips
• serrated mag release
• old style slide top serrations (some pieces of this batch got newer style flat top serrations and serrated back of the slide)

Bottom: WA Wilson Combat Tactical Supergrade

• 2006 release
• SCW2, variable hop barrel
• HW slide and frame with fluoropolymer coating - black slide and blue-grey frame finish
• checkered mag release
• lost wax cast hammer, sear and disconnector with factory custom tuning
• black nickel plated inner barrel
• stock wood-grain plastic grips replaced with Wilson Combat French walnut double diamond grips with two tone medallions