Login

u/anduscd

Image 1 — First layer squished/transparent on the left, perfect on the right (Ender 3 V2 Neo). I've checked all the usual suspects, please help
Image 2 — First layer squished/transparent on the left, perfect on the right (Ender 3 V2 Neo). I've checked all the usual suspects, please help
Image 3 — First layer squished/transparent on the left, perfect on the right (Ender 3 V2 Neo). I've checked all the usual suspects, please help
Image 4 — First layer squished/transparent on the left, perfect on the right (Ender 3 V2 Neo). I've checked all the usual suspects, please help
▲ 2 r/Ender3V2NEO+1 crossposts

First layer squished/transparent on the left, perfect on the right (Ender 3 V2 Neo). I've checked all the usual suspects, please help

Hey everyone, I'm losing my mind over a first-layer issue on my Ender 3 V2 Neo and could really use some advanced troubleshooting ideas.

​As you can see in the pictures, the left side of my skirt/first layer is completely squished and transparent (nozzle too close), while the right side looks perfectly fine.

​Here is what I have ALREADY done/checked, so we can rule these out:

​Firmware: Running mriscoc Professional Firmware.

​Bed Leveling: Used the Tramming Wizard. The bed is mechanically trammed perfectly (within 0.00 - 0.01mm tolerance on all corners).

​ABL / Mesh: Created a fresh mesh and saved it.

Has anyone experienced this exact asymmetrical issue after perfect tramming? What else should I check physically? Thanks!

u/anduscd — 1 day ago