Hi guys. So I got this machine a year ago and basically did nothing. Today I fished it out after looking at it for a week and fired it up. I discovered that opnsense doesn't like the WiFi on it. I asked the internet what was going on and it says:

> Hardware Limitations: OPNsense runs on FreeBSD, which has poor support for modern Wi-Fi standards (such as Wi-Fi 5/6/AC/AX); it generally only supports older 802.11b/g/n cards, typically from Qualcomm Atheros or MediaTek, while excluding Intel cards which often lack AP mode support.

I have "Intel inside" :-(

The advice "the internet" had to offer was:

> Recommended Architecture: For robust performance, it is widely recommended to use dedicated external wireless access points (like UniFi or Ruckus) connected via Ethernet, allowing OPNsense to manage network traffic, VLANs, and security policies while the AP handles the wireless radio signals.

The cheapest hotspot with an Ethernet plug on amazon is 75 euros. My options are:

• Try to fix the WiFi on the existing device
• Buy an external AP.
• Get a compatible WiFi dongle.
• Buy a new computer

I don't really want to shell out for another multi-hundred ordi.

I have a managed switch (in retrospect I could have skipped this) so I can run two VLANS with the AP.

What should I do?

Hi guys,
I'm using Anki and the Kofi french deck. On the whole I am extremely happy with this setup. I have run into a few tiny problems. I want to emphasize that out of maybe 2700 cards there are a handful of possible bad ones.

I wrote this comment on a post from two years ago about a few of these problems:

https://www.reddit.com/r/Anki/comments/190zej6/comment/oqt96z3/

Given the amount of time that has passes I doubt that I will get a reply.

These are some of the changes that I proposed:

Allons, chéri,

¡ {{c1::sache::…savoir…}} (que tu es aimé(e)) !

Allons, les gars,

¡ {{c1::sachons::…savoir…}} (que nous sommes la meilleure équipe) !

Allons, madame,

¡ {{c1::sachez::…savoir…}} (que vous êtes la patronne) !

For the savoir ones can you think of a better way to word these questions to elicit the correct response? The use of "que" implies the subjunctive which is not what I want.

Hi guys. I'm setting up an emulated device under android studio. The emulated phone is running android 14 and it seems to be working correctly. I get this error when I try to

~ $ proot-distro install debian
[] Installing 'debian:latest' as 'debian'...
[] Downloading 1 missing layer(s) for 'debian' (x86_64)... [] Authenticating with registry (anonymous)...
[] f32f49ce655a: Downloading layer 1/1 (47.0 MiB)...
[!] Failed to install: [SSL] record layer failure (_ssl.c:2658)

I have tried installing openssl static and messing with the paths.

This is termux-info:

~ $ termux-info
Termux Variables: TERMUX_APK_RELEASE=F_DROID
TERMUX_APP_PACKAGE_MANAGER=apt
TERMUX_APP_PID=13528
TERMUX_APP__DATA_DIR=/data/user/0/com.termux
TERMUX_APP__LEGACY_DATA_DIR=/data/data/com.termux
TERMUX_APP__SE_FILE_CONTEXT=u:object_r:app_data_file:s0:c191,c256,c512,c768
TERMUX_APP__SE_INFO=default:targetSdkVersion=28:completeTERMUX_IS_DEBUGGABLE_BUILD=0
TERMUX_MAIN_PACKAGE_FORMAT=debian
TERMUX_VERSION=0.118.3
TERMUX__HOME=/data/data/com.termux/files/home
TERMUX__PREFIX=/data/data/com.termux/files/usr
TERMUX__ROOTFS_DIR=/data/data/com.termux/files TERMUX__SE_PROCESS_CONTEXT=u:r:untrusted_app_27:s0:c191,c256,c512,c768 TERMUX__USER_ID=0
Packages CPU architecture: x86_64 Subscribed repositories:

sources.list

deb https://termux.3san.dev/termux/termux-main stable main
Updatable packages:
All packages up to date
termux-tools version: 1.45.0
Android version: 14
Kernel build information: Linux localhost 6.1.23-android14-4-00257-g7e35917775b8-ab9964412 #1 SMP PREEMPT Mon Apr 17 20:50:58 UTC 2023 x86_64 Android
Device manufacturer: Google
Device model: sdk_gphone64_x86_64
Supported ABIs:
SUPPORTED_ABIS: x86_64,arm64-v8a
SUPPORTED_32_BIT_ABIS:
SUPPORTED_64_BIT_ABIS: x86_64,arm64-v8a
LD Variables:
LD_LIBRARY_PATH=/data/data/com.termux/files/usr/lib/openssl-1.1 LD_PRELOAD=/data/data/com.termux/files/usr/lib/libtermux-exec-ld-preload.so x86_64,arm64-v8a SUPPORTED_32_BIT_ABIS: SUPPORTED_64_BIT_ABIS: x86_64,arm64-v8a LD Variables: LD_LIBRARY_PATH=/data/data/com.termux/files/usr/lib/openssl-1.1 LD_PRELOAD=/data/data/com.termux/files/usr/lib/libtermux-exec-ld-preload.so

Salut à tous et à toutes,

J'ai récemment essayé d'ouvrir un nouveau compte chez Easybourse. J'ai fait cela car j'ai constaté que la Banque Postale ne me permettait pas d'acheter un ETF pétrolier. J'ai trouvé les ETF (ou ETC) suivants disponibles en Europe :

WisdomTree Brent Crude Oil (ISIN : JE00B78CGV99)

WisdomTree Bloomberg Brent Crude Oil (ISIN : IE00BVFZGD11)

WisdomTree Brent Crude Oil - EUR Daily Hedged (ISIN : JE00B7305Z55)

WisdomTree Brent Crude Oil 3x Daily Leveraged ETN (ISIN : IE00BMTM6D55)

Xtrackers Brent Crude Oil Optimum Yield ETC (ISIN : DE000A1KYN55)

Aujourd'hui, après plus d'un mois, easybourse m'a autorisé à transférer une partie (mais pas la totalité) de mes fonds vers mon nouveau compte. Sans surprise, aucun de ces ETC n'est disponible chez easybourse. Après quelques semaines d'attente, j'ai tenté d'ouvrir un compte chez IBKR. J'attends toujours leur réponse, mais ils ne m'ont encore demandé aucun justificatif. Je doute donc qu'ils ouvrent mon compte rapidement. J'ai le sentiment que c'est une courte période pour acheter du pétrole avant que les prix ne s'envolent. Mes questions sont les suivantes :

• Quelle banque me permettrais d'acheter des ETF pétroliers ? Je souhaite notamment acheter l'ETF WisdomTree Brent Crude Oil.

• Avez-vous déjà réussi à ouvrir un compte bancaire hors de France ?

• Je rencontre régulièrement des difficultés pour effectuer des virements. Banque Postale ne me permet de transférer que 5 000 euros tous les trois jours. Comment procédez-vous pour effectuer ces virements ?

Hi guys,
I'm following this desk:
https://www.asiteaboutnothing.net/w_kofi-french.php

I have set the new cards per day to 42. Today I had 233 cards. It took me about four hours to go though them I honestly don't think I can remember anything from that. It looks like I had 129 new cards today. Where did that come from. I set the new card count to zero but it looks like I will have 68 to review tomorrow and 141 the next day. I can't add any cards or I will be overwhelmed. This is getting out of hand. What did I do wrong?

Hi guys, I've been using Anki for about a week. I use the Ultimate French Conjugation Flashcards deck. I'm pretty happy with it so far but it does some things I don't like. The first thing is that I don't get to choose which verbs I am working on. there are some instructions on the web site but those didn't work for me. When I am still doing Être it starts doing Avoir. Then it will add a new verb Demander while I am still working on the last two. It also had these subjunctive past cards which I don't want. There is a thing there about removing them one by one but I want to remove them all at once. So, I want to:

• choose which verbs I am working on and only do those verbs
• remove unwanted conjugations all at once.

How do I do that?

One more thing. I like this deck but I want to start over. How do I start from scratch?

Thanks.