![Image 1 — Probe leak [Sage Dual Boiler]](https://preview.redd.it/xscqv5swqbkh1.jpg?width=4284&format=pjpg&auto=webp&s=d97d387511d9e6cd2cbd597122b334cfd0d304d2)
![Image 2 — Probe leak [Sage Dual Boiler]](https://preview.redd.it/wmoit5swqbkh1.jpg?width=3024&format=pjpg&auto=webp&s=7df0c02fd5f73a80328a81b54c38d194f309ad73)
![Image 3 — Probe leak [Sage Dual Boiler]](https://preview.redd.it/ly8ekd0jsbkh1.jpg?width=4032&format=pjpg&auto=webp&s=4b2ce3801bc5c844646169be4ee99ac67d272973)
![Image 4 — Probe leak [Sage Dual Boiler]](https://preview.redd.it/5wo3zd0jsbkh1.jpg?width=5712&format=pjpg&auto=webp&s=9430e94d797571a06400de70be35b1f2dd88a4e6)
Sorry for the repost from my original post on https://www.reddit.com/r/espresso/comments/1v71607/probe_leak_sage_dual_boiler/
My Sage Dual Boiler has a probe leak. I tried to research online but cannot find out how to fix it. The ones on Youtube videos has o-ring and fast release, this one doesn't and use a bolt instead. Do you know what can I buy to replace/fix it?
I have posted here before as my machine didn't work properly. I fixed part of it by replacing the solenoid. The solenoid replacement definitely works, but it only pump the pressure gauge to 3 bars instead of original 9 bars.
I found out that this probe leaks which could cause this. I pulled this out previously as an attempt to fix the pressure following youtube videos, but now it leaks and I've tried to tighten the bolt as much as I can without lucks. The ones on Youtube videos has o-ring and fast release, this one doesn't and use a bolt instead. Do you think this is the cause? Any suggestion to make it stop leaking. There is no o-ring or anything in it originally.
I have a Sage Dual Boiler Model SES920 BSS /K. The steam wand and hot water works perfectly, but brew group has no water coming out. It has some water came out a few days ago after 10s, dripping enough to make a "double espresso" after a whole minute, but now it is completely dry. I tried to descale, turn off + hard reset, check for calcium build up in the pipes but no luck so far. Any suggestions where to look next?