u/il3gend

New
Diagnostics page — per-miner, per-operating-point breakdown of pool vs reported hashrate, capture %, effective hashrate, implied vs reported error, and per-setting share reconciliation
stratum reconstruction diagnostics — set_difficulty count, pool difficulty, submits/plotted/dropped, extranonce1 status, recent targets and diffs
Network block timer — time since the last block found network-wide, in the Windows top bar and both fleet cards, counting up live
Fleet pace made per-miner honest — each miner judged against its own work and best, so staggered restarts no longer skew the fleet number
Session-best clearing now restart-corroborated — a firmware best-drop only clears the share list if uptime also reset; glitches keep the list
Session-best events logged to Crash/Restart Reports — reviewable Session Cleared / Best Kept cards instead of watching the live log
Newer firmware support — captures extranonce1 from the mining.subscribe reply, not just the older extranonce_str line; covers old and new firmware
Enlarged green top-bar stats (Shares / HR / Block) matching the card and button green, filling the bar without growing it
Uniform miner-bar button heights and trimmed bar padding on Windows
Linux / Umbrel variant brought current, including a Node port of the N miner diagnostics with a byte-verified self-test

Previous
Remove a miner without losing its history — offline it and re-add the same IP later to reconnect to its data
🧹 Purge Miner — completely wipe a miner from every store (Windows global button + per-miner on mobile)
Per-miner all-time clear — wipe a single miner’s all-time Best Diffs or HR Scores, syncing both ways
Dynamic Governor — auto-adjusts frequency/voltage/fan to hold temperature, VR-temp, and current bands, with dwell/settle timers, 24hr scheduling, and restart-after-adjust
Governor amps band — cap current draw to protect the input connector, not just temperature
VR fan control — set the VR fan’s mode, manual speed, and PID target independently of the ASIC fan
Correct target-temp & min-fan reading across firmwares — no default snap-back; Min-Fan shows only where supported
Multi-sensor temperatures — per-ASIC and per-VR labeling, with per-ASIC hashrate/error stats
Per-panel Y-axis zoom on the hashrate chart to reveal a steady miner’s real variation
Hashrate-only controls (HR / View / Y) appear on the hashrate chart only
Difficulty parsing handles K/M/G/T suffixes
Crash/Restart reports fire once per outage instead of repeating
Notification deck — toasts stack into a tidy, tappable deck
App mode browser launch (no throttling)
Port cleanup on startup
Time range dropdown
Efficiency stat on Windows and mobile
Crash/Restart Reports system
Chart history persists across session resets
Stall detection on mobile
Scripts drag-and-drop reordering with bidirectional sync
Battery saver refresh options
Mobile App Settings restructure
Updated launcher behavior
Tracks target difficulty set by the pool
Tracks session best up to 500 difficulties
Tracks all-time best up to 500 difficulties
AxeOS Scoreboard integration (supports up to 500 entries)
Automatic deduplication of scoreboard entries
Tracks average share time
Live difficulty chart with scroll and zoom
Live hashrate chart
Live temperature chart for all ASICs and VR
Trace back temps 41 hours to see if a miner overheated when it crashed
Full miner settings — frequency, voltage, fan
Full pool settings — primary and fallback stratum
Nameable miners
Custom miner colors
Auto-restart after 5+ minutes with no shares
Max 3 auto-restarts per hour with warning
Stall detection — stats zero out after 30 seconds with no hashing
Block found alert with audio
Total watts display
Total hashrate display
Live power cost calculator ($/day)
Live block finding odds calculator
Scripts engine — automate miner settings based on conditions
Scripts support temperature, hashrate, frequency, time of day, and more
Scripts sync bidirectionally between Windows and iOS
iOS companion app
Customizable theme colors on iOS
Improved mobile viewing
Per-miner temps-only view on iOS
Auto-restart toggle on iOS
In-app notifications on iOS
Block found banner and audio alert on iOS & Windows
Remote access via Tailscale
Launch in preferred browser
Total color control with themes
Stalled miner notification when miner is stuck in power fault, etc.
Accepted share chart dots — green 0–1M, yellow 1M–100M, red 100M+

Requires Windows/Umbrel/Linux for server, then works on iOS/Android via browser app. Instructions in the readme.

Windows
https://github.com/iL3GEND88/Bitaxe-Difficulty-Tracker-/releases

Mac/linux/umbrel
https://github.com/iL3GEND88/Bitaxe-Difficulty-Tracker-Umbrel-Linux/releases/tag/V7.0

New
Fleet card — the whole rig as one card above the miners: combined hashrate, total power, fleet efficiency, shares/rejects, fleet-wide all-time and session best. Collapsible and color-settable, on Windows and mobile
Luck — 1hr / 4hr / 12hr / 24hr luck on the fleet card and on every miner card, both platforms. Green over 100%, amber and red under. Hideable in the stats toggles
Luck that’s correct on every board — miners that only log shares meeting the pool target. They’re now detected automatically and scored by counting shares above target instead of summing ones they never reported
Vardiff-aware luck math — expected shares are now weighted by the pool difficulty that was actually in effect at the time, not a flat average
Downtime no longer counts against luck — expected work is measured over hashing time only, so one reboot doesn’t drag a 24hr window down for the rest of the day
Live pool difficulty tracking — the server learns the pool’s target from the stratum stream, remembers it across restarts, and estimates it from the smallest observed share if it hasn’t seen one yet
Charts dropdown — every chart behind one toolbar button that shows which view you’re on. Difficulty, Hashrate/Temp, and five analysis views, instead of three buttons and a menu
Luck Curve — how your accepted shares stack up against ideal odds on a log-log curve, with your best share marked “best 1 in N”
Efficiency Curve — J/TH vs MHz plotted from your own settled runs, best point ringed, so you can see your own knee. One line through every run in frequency order, with a bracket where you’ve held a frequency at several voltages
Volt/Temp Map — voltage vs temperature scatter colored by frequency, with a trend line that prints your mV/°C and a band showing how tightly your runs actually fit it
Cold-Drop Watch — flags hashrate sagging because the chips got too cold, a failure that throws no error anywhere
Ambient Temp — works out the room temperature from how hard each miner is working to stay cool. Click the chart once and type what your thermometer says; it calibrates every miner from that one reading. Catches a warming room even when the chips look steady, because the fans are doing the absorbing
Best-share pace — expected best share for the work you’ve done, the range that’s unremarkable, and your actual best. Green above expected, red below. The range is always about 22x wide no matter how long you run, which is worth knowing before reading anything into a single number
Miner degradation — samples each miner every 6 hours and compares old readings against recent ones at the same frequency and voltage, with room temperature subtracted. Reports efficiency drift, hashrate drift, and heat rise. Doesn’t need the app running around the clock
Restart when underperforming — per-miner, off by default. Restarts a miner whose session best falls far below what its work predicts, over a window of 4hr up to 7 days. Trigger on a percentage below expected, below the range, or below a number you type. Comes with the actual false-alarm odds, because being below expected is normal — half of all healthy sessions are
Run logger — quietly records each stable frequency/voltage operating point so the efficiency and volt/temp charts have real data to plot. Now ignores impossible readings from a miner mid-boot instead of storing them as real operating points
Per-miner chart timeframe — 1hr, 2, 4, 6, 8, 12, 24, 36hr per miner on the hashrate/temp chart, independent of the master chart setting and remembered per miner. 36hr covers a full night-day-night cycle
Difficulty chart timeframe moved into the chart itself — 10s up to 1 week, per chart, and it now means what it says. Pick 1hr and you see one hour. It used to feed a zoom slider, so 24hr actually showed about 38 minutes
Mobile shows one chart at a time — pick it from the pills at the top, or None. The others aren’t drawn at all instead of all six rendering constantly
Apple Watch complication — a /fleet endpoint serves fleet hashrate, shares, best diff and luck as JSON, driving a watch complication over Tailscale
Per-miner running cost shown in the power square
Network difficulty and Block % beside the best-diff squares, read from each miner’s own reported network difficulty so it reflects the chain that miner is actually on
Script actions for both fans — setAsicTargetTemp, setVrTargetTemp, setVrFanSpeed. The VR actions skip cleanly on single-fan miners
One data file — everything that used to be spread across three JSON files plus browser storage is now a single bitaxe-data.json. Move that one file to a new folder and your history, scripts, reports, governors, all-time bests, degradation log and room-temperature history all come with it. Migrates itself on first launch
Notifications colored by miner — the stripe down the side matches the miner it’s about, fleet green for app-wide messages
Fan settings that actually apply — fan writes now echo the miner’s fan array back verbatim instead of rebuilding it. Fixes target-temp changes that appeared to do nothing, and the connector-1-stuck-at-90% lock
Fleet session best clears when a miner restarts — the record holder used to linger with a stale number until its next poll
Min Fan Speed field always available in auto mode, even on boards that don’t report it
Share stream recovers from a power cycle on its own instead of staying dead until you restart the app
Charts survive their own errors — one bad chart used to kill the drawing loop and freeze every chart until you relaunched
Mobile no longer freezes when you switch charts, and the refresh can’t get stuck if something fails
Renaming a miner on mobile no longer pushes the Save button off the screen
Minimum chart difficulty and minimum dot filters are remembered between launches
Tap a card header to collapse it
Tighter miner card spacing — a lot less wasted vertical space

Previous
Remove a miner without losing its history — take a miner offline and its history stays; re-add the same IP later and it reconnects to its data
🧹 Purge Miner — completely wipe a miner from every store (local + server) when you want it gone for good (Windows global button + per-miner on mobile)
Per-miner all-time clear — 🗑 to wipe a single miner’s all-time Best Diffs or HR Scores, on Windows and mobile (durable, syncs both ways)
Dynamic Governor — auto-adjusts frequency/voltage/fan to hold miners inside temperature, VR-temp, and current (amps) bands, with dwell/settle timers, per-profile 24hr scheduling, and restart-after-adjust
Governor amps band — protect the input connector by capping current draw, not just temperature
VR fan control — set the second (VR) fan’s mode (Linked / Manual / Auto-PID), manual speed, and PID target temp independently of the ASIC fan
Correct target-temp & min-fan reading across firmwares — no more snapping back to a default; Min-Fan field only shows on boards that support it
Multi-sensor temperatures — proper per-ASIC and per-VR labeling for boards with multiple sensors; per-ASIC hashrate/error stats
Working per-panel Y-axis zoom on the hashrate chart — tighten the axis so a big, rock-steady miner’s line fills the chart and shows its real variation
Hashrate-only controls (HR / View / Y) now appear on the hashrate chart only, not the difficulty chart
Difficulty parsing handles K/M/G/T suffixes
Crash/Restart reports now fire once per outage instead of repeating every few minutes
Notification deck — toasts stack into a tidy, tappable deck
App mode browser launch (no throttling)
Port cleanup on startup
Time range dropdown
Efficiency stat on Windows and mobile
Crash/Restart Reports system
Chart history persists across session resets
Stall detection on mobile
Scripts drag-and-drop reordering with bidirectional sync
Battery saver refresh options
Mobile App Settings restructure
Updated launcher behavior
Tracks target difficulty set by the pool
Tracks session best up to 500 difficulties
Tracks all-time best up to 500 difficulties
AxeOS Scoreboard integration (supports up to 500 entries)
Automatic deduplication of scoreboard entries
Tracks average share time
Live difficulty chart with scroll and zoom
Live hashrate chart
Live temperature chart for all ASICs and VR
Trace back temps 41 hours to see if a miner overheated when it crashed
Full miner settings — frequency, voltage, fan
Full pool settings — primary and fallback stratum
Nameable miners
Custom miner colors
Auto-restart after 5+ minutes with no shares
Max 3 auto-restarts per hour with warning
Stall detection — stats zero out after 30 seconds with no hashing
Block found alert with audio
Total watts display
Total hashrate display
Live power cost calculator ($/day)
Live block finding odds calculator
Scripts engine — automate miner settings based on conditions
Scripts support temperature, hashrate, frequency, time of day, and more
Scripts sync bidirectionally between Windows and iOS
iOS companion app
Customizable theme colors on iOS
Improved mobile viewing
Per-miner temps-only view on iOS
Auto-restart toggle on iOS
In-app notifications on iOS
Block found banner and audio alert on iOS & Windows
Remote access via Tailscale
Launch in preferred browser
Total color control with themes
Stalled miner notification when miner is stuck in power fault, etc.
Accepted share chart dots — green 0–1M, yellow 1M–100M, red 100M+

Requires Windows/Umbrel/Linux for server, then works on iOS/Android via browser app. Instructions in the readme.

Windows
https://github.com/iL3GEND88/Bitaxe-Difficulty-Tracker-

Mac/Linux/Umbrel
https://github.com/iL3GEND88/Bitaxe-Difficulty-Tracker-Umbrel-Linux

New
Added support for miner that shall not be named.
Remove a miner without losing its history — take a miner offline and its history stays; re-add the same IP later and it reconnects to its data
🧹 Purge Miner — completely wipe a miner from every store (local + server) when you want it gone for good (Windows global button + per-miner on mobile)
Per-miner all-time clear — 🗑 to wipe a single miner’s all-time Best Diffs or HR Scores, on Windows and mobile (durable, syncs both ways)
Dynamic Governor — auto-adjusts frequency/voltage/fan to hold miners inside temperature, VR-temp, and current (amps) bands, with dwell/settle timers, per-profile 24hr scheduling, and restart-after-adjust
Governor amps band — protect the input connector by capping current draw, not just temperature
VR fan control — set the second (VR) fan’s mode (Linked / Manual / Auto-PID), manual speed, and PID target temp independently of the ASIC fan
Correct target-temp & min-fan reading across firmwares — no more snapping back to a default; Min-Fan field only shows on boards that support it
Multi-sensor temperatures — proper per-ASIC and per-VR labeling for boards with multiple sensors; per-ASIC hashrate/error stats
Working per-panel Y-axis zoom on the hashrate chart — tighten the axis so a big, rock-steady miner’s line fills the chart and shows its real variation
Hashrate-only controls (HR / View / Y) now appear on the hashrate chart only, not the difficulty chart
Difficulty parsing handles K/M/G/T suffixes
Crash/Restart reports now fire once per outage instead of repeating every few minutes
Notification deck — toasts stack into a tidy, tappable deck
Previous
App mode browser launch (no throttling)
Port cleanup on startup
Time range dropdown
Efficiency stat on Windows and mobile
Crash/Restart Reports system
Chart history persists across session resets
Stall detection on mobile
Scripts drag-and-drop reordering with bidirectional sync
Battery saver refresh options
Mobile App Settings restructure
Updated launcher behavior
Tracks target difficulty set by the pool
Tracks session best up to 500 difficulties
Tracks all-time best up to 500 difficulties
AxeOS Scoreboard integration (supports up to 500 entries)
Automatic deduplication of scoreboard entries
Tracks average share time
Live difficulty chart with scroll and zoom
Live hashrate chart
Live temperature chart for all ASICs and VR
Trace back temps 41 hours to see if a miner overheated when it crashed
Full miner settings — frequency, voltage, fan
Full pool settings — primary and fallback stratum
Nameable miners
Custom miner colors
Auto-restart after 5+ minutes with no shares
Max 3 auto-restarts per hour with warning
Stall detection — stats zero out after 30 seconds with no hashing
Block found alert with audio
Total watts display
Total hashrate display
Live power cost calculator ($/day)
Live block finding odds calculator
Scripts engine — automate miner settings based on conditions
Scripts support temperature, hashrate, frequency, time of day, and more
Scripts sync bidirectionally between Windows and iOS
iOS companion app
Customizable theme colors on iOS
Improved mobile viewing
Per-miner temps-only view on iOS
Auto-restart toggle on iOS
In-app notifications on iOS
Block found banner and audio alert on iOS & Windows
Remote access via Tailscale
Launch in preferred browser
Total color control with themes
Stalled miner notification when miner is stuck in power fault, etc.
Accepted share chart dots — green 0–1M, yellow 1M–100M, red 100M+

Requires Windows/Umbrel/Linux for server, then works on iOS/Android via browser app. Instructions in the readme.

Windows
https://github.com/iL3GEND88/Bitaxe-Difficulty-Tracker-
Mac/Linux/Umbrel
https://github.com/iL3GEND88/Bitaxe-Difficulty-Tracker-Umbrel-Linux

New
Added support for Nexus S1
Remove a miner without losing its history — take a miner offline and its history stays; re-add the same IP later and it reconnects to its data
🧹 Purge Miner — completely wipe a miner from every store (local + server) when you want it gone for good (Windows global button + per-miner on mobile)
Per-miner all-time clear — 🗑 to wipe a single miner’s all-time Best Diffs or HR Scores, on Windows and mobile (durable, syncs both ways)
Dynamic Governor — auto-adjusts frequency/voltage/fan to hold miners inside temperature, VR-temp, and current (amps) bands, with dwell/settle timers, per-profile 24hr scheduling, and restart-after-adjust
Governor amps band — protect the input connector by capping current draw, not just temperature
VR fan control — set the second (VR) fan’s mode (Linked / Manual / Auto-PID), manual speed, and PID target temp independently of the ASIC fan
Correct target-temp & min-fan reading across firmwares (Nexus-class) — no more snapping back to a default; Min-Fan field only shows on boards that support it
Multi-sensor temperatures — proper per-ASIC and per-VR labeling for boards with multiple sensors; per-ASIC hashrate/error stats
Working per-panel Y-axis zoom on the hashrate chart — tighten the axis so a big, rock-steady miner’s line fills the chart and shows its real variation
Hashrate-only controls (HR / View / Y) now appear on the hashrate chart only, not the difficulty chart
Difficulty parsing handles K/M/G/T suffixes
Crash/Restart reports now fire once per outage instead of repeating every few minutes
Notification deck — toasts stack into a tidy, tappable deck
Previous
App mode browser launch (no throttling)
Port cleanup on startup
Time range dropdown
Efficiency stat on Windows and mobile
Crash/Restart Reports system
Chart history persists across session resets
Stall detection on mobile
Scripts drag-and-drop reordering with bidirectional sync
Battery saver refresh options
Mobile App Settings restructure
Updated launcher behavior
Tracks target difficulty set by the pool
Tracks session best up to 500 difficulties
Tracks all-time best up to 500 difficulties
AxeOS Scoreboard integration (supports up to 500 entries)
Automatic deduplication of scoreboard entries
Tracks average share time
Live difficulty chart with scroll and zoom
Live hashrate chart
Live temperature chart for all ASICs and VR
Trace back temps 41 hours to see if a miner overheated when it crashed
Full miner settings — frequency, voltage, fan
Full pool settings — primary and fallback stratum
Nameable miners
Custom miner colors
Auto-restart after 5+ minutes with no shares
Max 3 auto-restarts per hour with warning
Stall detection — stats zero out after 30 seconds with no hashing
Block found alert with audio
Total watts display
Total hashrate display
Live power cost calculator ($/day)
Live block finding odds calculator
Scripts engine — automate miner settings based on conditions
Scripts support temperature, hashrate, frequency, time of day, and more
Scripts sync bidirectionally between Windows and iOS
iOS companion app
Customizable theme colors on iOS
Improved mobile viewing
Per-miner temps-only view on iOS
Auto-restart toggle on iOS
In-app notifications on iOS
Block found banner and audio alert on iOS & Windows
Remote access via Tailscale
Launch in preferred browser
Total color control with themes
Stalled miner notification when miner is stuck in power fault, etc.
Accepted share chart dots — green 0–1M, yellow 1M–100M, red 100M+

Requires Windows/Umbrel/Linux for server, then works on iOS/Android via browser app. Instructions in the readme.

Windows
https://github.com/iL3GEND88/Bitaxe-Difficulty-Tracker-
Mac/Linux/Umbrel
https://github.com/iL3GEND88/Bitaxe-Difficulty-Tracker-Umbrel-Linux

Guys please go to the issues on this repo https://github.com/BitLuckFW/ESP-Miner-Nexus and request the overclocking limits to be removed. The firmware rejects anything over 450mhz and 1050mv. The creator thinks we need a baby sitter. I’m sitting here with a 30 degree asic and a 29 degree vr with all the headroom in the world. We know the risk of overclocking. We understand we could cook the board with too many amps. I tried patching the OTA firmware but it rejects the modified bin. Tried patching the factory firmware and installing via usb but something wasn’t quite right with my patch. Hey while you’re at it, ask them to add an error rate feature. We need it for tuning. You can find my comments on the issues and just thumbs up them.

Anybody know how to get the Nexus S1 to allow you to overclock. I click the “danger zone” button. Type in 475mhz and go to save. It gives me a warning about overclocking and says “proceed anyway” I click that and it says “saved” but just stays at 450mhz. I’m guessing it’s a bug and I’ve already tried reinstalling the firmware. If anyone has the esp miner bin and the www bin for the nexus, pls share it. I also can’t find it available tho it’s claimed to be open source. But if you know how to get around this, pls let me know.

Free and open source, no ads or subscriptions

New
•Difficulty Scores page — session best and all-time best per miner, collapsible per miner, live updates
•HR High Scores page — session and all-time hashrate records with error rate, collapsible per miner
•Per-list clear buttons — separately clear difficulty or HR scores per miner on Windows and mobile
•Clear session button on Windows toolbar and mobile session tab
•Session best list persists across app restarts with uptime validation
•Session best snapshot protected against unexpected clears
•Auto-restart now fires correctly after crash reports trigger
•Crash reports capture pre-crash hashrate and temps (60 second lookback)
•Pool switch detected and labeled in crash reports
•Block found banner fixed — now fires immediately via API polling, not on dismiss
•NerdQaxe and NerdOCTAXE Gamma compatibility (lastResetReason fallback)
•AutoRestarts script condition — trigger scripts based on restart count in last hour
•Disco Mode — hides miner cards, expands live log full height
•Odds calculator shows exact values instead of rounded to nearest 100
•Automatic ufw firewall port opening on Linux/Umbrel

Previous
•App mode browser launch (no throttling)
•Port cleanup on startup
•Time range dropdown
•Efficiency stat on Windows and mobile
•Crash/Restart Reports system
•Chart history persists across session resets
•Stall detection on mobile
•Scripts drag-and-drop reordering with bidirectional sync
•Battery saver refresh options
•Mobile App Settings restructure
•Updated launcher behavior
•Tracks target difficulty set by the pool
•Tracks session best up to 500 difficulties
•Tracks all-time best up to 500 difficulties
•AxeOS Scoreboard integration (supports up to 500 entries)
•Automatic deduplication of scoreboard entries
•Tracks average share time
•Live difficulty chart with scroll and zoom
•Live hashrate chart
•Live temperature chart for all ASICs and VR
•Trace back temps 41 hours to see if a miner overheated when it crashed
•Full miner settings — frequency, voltage, fan
•Full pool settings — primary and fallback stratum
•Nameable miners
•Custom miner colors
•Auto-restart after 5+ minutes with no shares
•Max 3 auto-restarts per hour with warning
•Stall detection — stats zero out after 30 seconds with no hashing
•Block found alert with audio
•Total watts display
•Total hashrate display
•Live power cost calculator ($/day)
•Live block finding odds calculator
•Scripts engine — automate miner settings based on conditions
•Scripts support temperature, hashrate, frequency, time of day, and more
•Scripts sync bidirectionally between Windows and iOS
•iOS companion app
•Customizable theme colors on iOS
•Improved mobile viewing
•Per-miner temps-only view on iOS
•Auto-restart toggle on iOS
•In-app notifications on iOS
•Block found banner and audio alert on iOS & Windows
•Remote access via Tailscale
•Launch in preferred browser
•Total color control with themes
•Stalled miner notification when miner is stuck in power fault, etc.
•Accepted share chart dots green 0-1M, yellow 1M-100M, red 100M+

*Requires Windows/Umbrel/Linux for server, then works on iOS/Android via browser app. Instructions in the readme.

Windows
https://github.com/iL3GEND88/Bitaxe-Difficulty-Tracker-/releases

Mac/Linux/Umbrel
https://github.com/iL3GEND88/Bitaxe-Difficulty-Tracker-Umbrel-Linux/releases

New features coming soon

Gotta say I love the bitaxe beta 4 firmware.

Free and open source, no ads or subscriptions
**New**
App mode browser launch (no throttling)
Port cleanup on startup
Time range dropdown
Efficiency stat on Windows and mobile
Crash/Restart Reports system
Chart history persists across session resets. Stall detection on mobile
Scripts drag-and-drop reordering with bidirectional sync
Battery saver refresh options
Mobile App Settings restructure
Updated launcher behavior
**Previous**
Tracks target difficulty set by the pool
Tracks session best up to 500 difficulties
Tracks all-time best up to 500 difficulties
AxeOS Scoreboard integration (supports up to 500 entries)
Automatic deduplication of scoreboard entries
Tracks average share time
Live difficulty chart with scroll and zoom
Live hashrate chart
Live temperature chart for all ASICs and VR
Trace back temps 41 hours to see if a miner overheated when it crashed
Full miner settings — frequency, voltage, fan
Full pool settings — primary and fallback stratum
Nameable miners
Custom miner colors
Auto-restart after 5+ minutes with no shares
Max 3 auto-restarts per hour with warning
Stall detection — stats zero out after 30 seconds with no hashing
Block found alert with audio
Total watts display
Total hashrate display
Live power cost calculator ($/day)
Live block finding odds calculator
Scripts engine — automate miner settings based on conditions
Scripts support temperature, hashrate, frequency, time of day, and more
Scripts sync bidirectionally between Windows and iOS
iOS companion app
Customizable theme colors on iOS
Improved mobile viewing
Per-miner temps-only view on iOS
Auto-restart toggle on iOS
In-app notifications on iOS
Block found banner and audio alert on iOS & windows
Remote access via Tailscale
Launch in preferred browser
Total color control with themes
Stalled miner notification when miner is stuck in power fault, etc.
Accepted share charts dots green 0-1M, yellow 1M-100M, red 100M+

Requires Windows/Mac/Umbrel/Linux for server, then works on iOS/Adroid via browser app. Instructions in the readme.

Windows
https://github.com/iL3GEND88/Bitaxe-Difficulty-Tracker-/releases/tag/v4.0

Mac/Linux/Umbrel
https://github.com/iL3GEND88/Bitaxe-Difficulty-Tracker-Umbrel-Linux/releases/tag/v4.0

Free and open source
Tracks target difficulty set by the pool
Tracks session best up to 500 difficulties
Tracks all-time best up to 500 difficulties
AxeOS Scoreboard integration (supports up to 500 entries)
Automatic deduplication of scoreboard entries
Tracks average share time
Live difficulty chart with scroll and zoom
Live hashrate chart
Live temperature chart for all ASICs and VR
Trace back temps to see if a miner overheated when it crashed
Full miner settings — frequency, voltage, fan
Full pool settings — primary and fallback stratum
Nameable miners
Custom miner colors
Auto-restart after 5+ minutes with no shares
Max 3 auto-restarts per hour with warning
Stall detection — stats zero out after 30 seconds with no hashing
Block found alert with audio
Total watts display
Total hashrate display
Live power cost calculator ($/day)
Live block finding odds calculator
Scripts engine — automate miner settings based on conditions
Scripts support temperature, hashrate, frequency, time of day, and more
Scripts sync bidirectionally between Windows and iOS
iOS companion app
Customizable theme colors on iOS
Improved mobile viewing
Per-miner temps-only view on iOS
Auto-restart toggle on iOS
In-app notifications on iOS
Block found banner and audio alert on iOS & windows
Remote access via Tailscale
Launch in preferred browser
Total color control with themes
Stalled miner notification when miner is stuck in power fault, etc.
Requires Windows and/or Umbrel/Linux bc that’s where the server runs, then works on iOS/Android

Guys idk if Umbrel/Linux works but I gave it a shot after repeated request. Would love some feedback if you get it working. There are instructions in the readme. Also I now have forced port opening local bc too many ppl were having trouble with following the instructions.

https://github.com/iL3GEND88/Bitaxe-Difficulty-Tracker-/releases/tag/v3.1

https://github.com/iL3GEND88/Bitaxe-Difficulty-Tracker-Umbrel-Linux/releases/tag/v3.1

https://github.com/iL3GEND88/Bitaxe-Difficulty-Tracker-/releases/tag/v3.0

Free and open source
Tracks target difficulty set by the pool
Tracks session best up to 500 difficulties
Tracks all-time best up to 500 difficulties
AxeOS Scoreboard integration (supports up to 500 entries)
Automatic deduplication of scoreboard entries
Tracks average share time
Live difficulty chart with scroll and zoom
Live hashrate chart
Live temperature chart for all ASICs and VR
Trace back temps to see if a miner overheated when it crashed
Full miner settings — frequency, voltage, fan
Full pool settings — primary and fallback stratum
Nameable miners
Custom miner colors
Auto-restart after 5+ minutes with no shares
Max 3 auto-restarts per hour with warning
Stall detection — stats zero out after 30 seconds with no hashing
Block found alert with audio
Total watts display
Total hashrate display
Live power cost calculator ($/day)
Live block finding odds calculator
Scripts engine — automate miner settings based on conditions
Scripts support temperature, hashrate, frequency, time of day, and more
Scripts sync bidirectionally between Windows and iOS
Improved mobile viewing
Per-miner temps-only view on iOS
Auto-restart toggle on iOS
In-app notifications on iOS
Block found banner and audio alert on iOS & windows
Remote access via Tailscale
Launch in preferred browser
Total color control with themes
Stalled miner notification when miner is stuck in power fault, etc.
Requires Windows, works on iOS via Safari with added support for android

https://github.com/iL3GEND88/Bitaxe-Difficulty-Tracker-/releases/tag/v3.0

Free and open source
Tracks target difficulty set by the pool
Tracks session best 100 difficulties
Tracks all-time best 100 difficulties
AxeOS Scoreboard integration
Automatic deduplication of scoreboard entries
Tracks average share time
Live difficulty chart
Live hashrate chart
Live temperature chart for all ASICs and VR
Trace back temps to see if a miner overheated when it crashed
Full miner settings — frequency, voltage, fan
Full pool settings — primary and fallback stratum
Nameable miners
Custom miner colors
Auto-restart after 5+ minutes with no shares
Max 3 auto-restarts per hour with warning
Block found alert with audio
Total watts display
Total hashrate display
Live block finding odds calculator
iOS companion app
Improved mobile viewing
Per-miner temps-only view on iOS
Auto-restart toggle on iOS
In-app notifications on iOS
Remote access via Tailscale
Launch in preferred browser
Requires Windows, works on iOS via Safari

Tbh guys I lost track of everything I changed and added. But it’s a major overhaul.

https://github.com/iL3GEND88/Bitaxe-Difficulty-Tracker-/releases/tag/v2.0

Free and open source
Tracks Target difficulty that is set by the pool
Tracks session best 100 difficulties
Tracks all time best 100 difficulties
Tracks average share time so you can adjust suggested difficulty with knowledge
Dashboards
Miner/pool settings
Charts Hashrate, all asic temps, and vr temps from the moment you turn it on so you can trace back and see if a miner overheated when it crashed.
Auto restart function for miners not hashing and sharing for 5+ minutes.
Nameable miners
No ads no subscriptions
Works on windows and iOS

https://github.com/iL3GEND88/Bitaxe-Difficulty-Tracker-/releases/tag/v1.1

Hey guys. I did a Thing. If you are like me and sometimes feel like miners are frozen bc the session best never increases, I made a difficulty tracker that tracks the top 100. Also has other features like an auto restart function if miners stop hashing and sharing for 5+ minutes. As well as charts hashrate with every asic chip and vr temp. Works on windows and iOS. It’s open source and free. Bitaxe & Nerdqaxe. I worked on it pretty hard so I hope you enjoy.

https://github.com/iL3GEND88/Bitaxe-Difficulty-Tracker-

Hey guys. I did a Thing. If you are like me and sometimes feel like miners are frozen bc the session best never increases, I made a difficulty tracker that tracks the top 100. Also has other features like an auto restart function if miners stop hashing and sharing for 5+ minutes. Also charts hashrate with every asic chip and vr temp. Works on windows and iOS. It’s open source and free. I worked on it pretty hard so I hope you enjoy.

https://github.com/iL3GEND88/Bitaxe-Difficulty-Tracker-

The chips themselves are higher up than the two large lower heat sinks. Sort of between both sets of heat sinks you see in the photo. Does anyone know what the lower ones are cooling?