u/kielbasa_i_pierogi

Hi all. I’m brand new to skateboards/eboards and I have a few questions if yall wouldn’t mind answering. For context, I have a gen1 halo board beast that I purchased as broken, but got it working with a new esc and remote.

1. I’m looking to replace the wheels on it, but the ones that are on the motors are stuck on the shaft to a degree that I feel like I’m doing something wrong. I read online that all you gotta do is take the one nut off and the wheel should slide off, but that’s def not the case. Any advice on how to get a stuck wheel off?

2. I don’t know what wheels are compatible with the board, but research suggests that Cloudwheels Discovery will work. Is that a good choice for mostly riding on the sidewalk and street? Is there something better I should buy instead? And how much range should I expect to lose when swapping to bigger wheels?

3. I had to replace the esc on this board and buy a new remote as well. I read that you have to input the wheel diameter into the remote settings to get accurate speed and range to display. The current wheels are 97mm and that’s what I put in, but it’s way off. It’s showing I’m going 20+mph when I’m only going about 10. What do I actually input for 97mm, and for 120mm wheels if I do get those?

Many thanks in advance.

Hi all. Selling off the final Fusion Drivers from my run, only 65 were made total. All the work is done by hand, including assembly, balancing, and the painstaking polishing of every face.

The brass crown is mated to the stainless steel shaft via a full ceramic bearing, spin time is 2-3min. The base is also stainless steel, with 12 n52 magnets implanted within the perimeter to hold six bits of your choice. Comes with six gold PH2 bits as shown. The velvet-lined bottom allows for all surface friendly usage.

Each set is $195 (driver, base, & bits), and as of right now, I have a few extra bases left which I can include gratis, just let me know. They accept any 1/4” bit driver and storage for six bits. Free shipping within 48 US states. Payment is versatile: Cash App, Venmo, Zelle, or I can send over a PayPal business invoice with buyer protection if preferred. I’ll cover the fee. Invoices will be from my brand, Malbork Designs. Leave a comment or message me if you’re interested, or would just like to know more about the driver. Happy to help.

Hi all, I’ve been playing around with a halo board beast that I bought a while back with a presumably bad esc. Can anyone suggest a good replacement that at least perform as good as the original esc (26mph top speed on 97mm wheels)? Idk if I need to worry about the kv rating or how many amps the Esc is rated for. Pretty new to the eboard game. I would like to spend no more than $100. The ones on AliExpress look tempting, but idk which one to choose. I’ll add a pic of the one currently in the board. Many thanks in advance.