u/kolo81

My Wacom tablet Intuos Pro L (about 5 years old) sometimes doesn't react to the pen (I only use it with a pen). When it first started, simply unplugging it and plugging in again helped, but then it started to solve the problem for literally a second or not at all. Restarting the computer usually helped, but sometimes I had to do it twice in a row. At the same time problem started to occur more and more often, even a few times a day. I tried another wacom tablet and everything worked well different model. I updated the software, which seemed to help a bit and then exchanged tha cable. It seemed to solve the problem, but only for a week or so. Now it happens occasionaly, usually when I turn the computer on in the morning or when I don't use it for a couple hours. Sometimes when I restart my computer because the tablet dosn't work, I check if it works and it's fine, and then when I start an app (zoom/ openboard) it stops working again, so I do the cycle again and then it's fine. Last week I tried switching the tablet off and on again using the device manager and it seemed to work better than restarting the computer, but today I also had to do it twice, and then again after starting zoom and openboard in a few minutes time from switching it off and on again. It's very annoying. Is there something I can do with this?

I'm looking for client that can connect thru proxy and works on linux?

We have email accounts hosted on a commercial provider's server. Today, we accidentally discovered that some accounts are returning delivery failure notices from gmail.com due to attachment size limits. After logging into the webmail interface, we found a redirect rule named "." (dot) that had been added to these accounts. This rule is designed to forward all incoming emails from the corporate address to a specific Gmail account.

None of our users added these rules. If this were happening at the local computer level, it would be one thing, but this is happening directly on the provider's server. Is it possible for such a rule to be created from a mail client (like Outlook or Thunderbird) just by clicking something? The provider insists that this must have been caused by our own actions.

Now I've something like this

Kid room only wifi, bathroom and hallway only tuya. Poor signal on archer VR600

thick walls of sipporex blocks and bricks

[KITCHEN] (central point of my flat)

Internet from my Internet provider 500/250 Mb/s
|
EdgeRouter 4
|
Archer VR600 Wi-FI 2,4/5 (central point of my flat)
├── QNAP
├
└── LAN → to bedroom

[BEDROOM] (poor wifi signal)

TL-SG108PE
├── printer 100M
├── LAN 1G PC 1
└── WR1043ND OpenWRT (AP wifi) --LAN 1000 Mb/s PC2 (and occasionally some devices cameras for tests, arduino/rpi with lan etc.)
I've in my flat few tuya devices some wifi and some thru gate depends of device.

I add WR1043ND because my wifi signal in bedroom was poor and that was at home 😄.

I thinking about upgrade my setup my internet speed was upgraded but my archer wifi is old i think.

I want equipment that I can manage my self without cloud, pay apps, controlers etc.

Chatgpt advise me finally

• GL.iNet Flint 2
• ASUS RT-AX58U V2

Previously he propose ubiquti u7 but I don't have poe in the kitchen

Because I need switch near edgerouter for LAN and Qnap and switch VR600 in place WR1043ND. Earlier he suggest me TP-LINK EAP610 but they don't have switch.

In my flat there's few thick walls of sipporex blocks and bricks. flat 100m2 kitchen is in center.

Now I'm thinking about the ASUS TUF-BE9400 or ASUS RT-AX59U and removing the Archer and WR1043ND, maybe the EdgeRouter too. If it doesn't cover the whole apartment, I'll add an AP (AiMesh node) in the bedroom in place of the WR1043ND. Is this a good idea? I have problems with APs without switches and I don't want to multiply devices.

Now I've something like this

[KITCHEN] (central point of my flat)

Internet from my Internet provider 500/250 Mb/s
|
EdgeRouter 4
|
Archer VR600 Wi-FI 2,4/5 (central point of my flat)
├── QNAP
├
└── LAN → to bedroom

[BEDROOM] (one side of the flat)

TL-SG108PE
├── printer 100M
├── LAN 1G PC 1
└── WR1043ND OpenWRT (AP wifi) --LAN 1000 Mb/s PC2 (and occasionally some devices cameras for tests, arduino/rpi with lan etc.)
I've in my flat few tuya devices some wifi and some thru gate depends of device.

Other side of the flat use only wifi (ex. kids rooms)

I add WR1043ND because my wifi signal in bedroom was poor and that was at home 😄.

I thinking about upgrade my setup. I want equipment that I can manage my self without cloud, pay apps etc. Chat advise me finally

• GL.iNet Flint 2
• ASUS RT-AX58U V2

Because I need switch near edgerouter for LAN and Qnap and switch VR600 in place WR1043ND. Earlier he suggest me TP-LINK EAP610 but they don't have switch.

In my flat there's few thick walls of sipporex blocks and bricks

I take pregabalin 75mg for anxiety GAD and overthinking

1x morning + 150mg mocobemide (second moclobemide I take about 12)

1x sometimes about 2 pm but not offten only if Im very nerves/anxiety

And this works during the day

For sleep doc gives my blessing 2x75mg pregabalin

I've problems from many years

Now I divided and take one about 8-9pm. Fall sleep about 10:30-11:30pm (now problems) - sleep 3-4 hours and when I wakes up (it's every night) about 2-3 am I take second one, read book fall sleep and wakes about 4-5 am. If I have some different plans for the day than usual I can't fall sleep again and stay awake from 3 am.

But in the every morning I feel that night was sh... and not regenerated at all

When I wake up during night I have a lot rumination and overthinking. If pregabalin is helping during the day is there a chance that I take 3x75mg at night I'll sleep? I wored about take more dose I don't want to be more addicted. In my opinion this road is for nothing you take more and you getting used to it. But if this helps my prioritize is to get good sleep.