I’m looking for one or two of the P-line Drop from last year’s mystery box. I have Venmo or trades like new 2026 Horizon c-line Cloudbreakers, other used Swedish Cloudbreakers, lots of Discmania, used, un-inked Timelapse, and some other brands, mostly used.
Just watched Niklas’ Drop video. So, where is the d-line vapor drop, and how did I miss that? Seriously though, if you know some in stock anywhere, drop a comment!
If you’ve thrown the new color glow DD from last month, what’s the stability compared to s-line,or especially the metal flake from last year?
Curious if it’s in the works?
What tips can you give to get good results for creating a full rig capture using the input.wav source? I have tried 8 times with the input.wav to make A1 captures, and all of them sound off compared to the wet/dry method. I must be doing something wrong, like have the signal too loud or too quiet? With the wet/dry, the A2 captures sound very accurate. I’m trying to get just ONE A1 capture that sounds the same.
I am sending out of an M-audio DUO, into a Boss tuner, then out to the amp. I don’t have a remap box. Is it just a matter of trial and error trying different output levels from the m-audio?
The problem with the A1 collab captures is either a prominent ‘honk’ and/or ‘blatty’ or flabby drive. I’m after an edge of breakup tone that sounds really good via wet/dry method. I just don’t have a pedal that loads A2.
There are a boatload of putter plastics. I throw a flex 3 P-line P2X and they are decently firm. Which plastic is the stiffest in your experience?
Who will make the first Budget (under $150) FX unit to run A2 native without file conversion? Mooer? Valeton? Soran? Sonicake? M-Vave?
In a recent YT review, Mooer official commented that most of their lineup will run A2 soon. Didn’t say native, but that would be cool. Seems like whoever goes in first might sell some units.
Looking for premier Q-line DD1 that you don’t bag because they’re too flippy. Venmo or trade for new in bag Horizon c-line Buhr Signature Cloudbreakers.
I have a Soran Tiny Stomp that only uses NAM A1 files. The default on tone3000 and on NeuralAmpModeler website is A2. I needed to create an A1 file, so after many hours, here is the very simple solution. I did all this on ipad just now.
Go to https://colab.research.google.com/github/sdatkinson/NAMTrainerColab/blob/main/notebook.ipynb
Scroll down. After the Training Parameters section, find the little hyperlink to Show Code. Click that so you can view/edit the code.
The code shows up. This is the beginning portion:
# Hi there! This is the code that makes this notebook work. Feel free to mess around
# with it :)
try:
import nam
except ImportError as e:
print("Installing NAM into Colab. This should take a couple seconds.")
# Check what we're starting with (Issue 399)
!if [ ! -d logs ]; then mkdir logs; fi
!pip list > logs/packages.log
!pip install neural-amp-modeler==0.13 >& logs/install.log
# Hint: use the next line instead for the very latest!
Where it says “neural-amp-modeler==0.13 >& logs/install.log” Change the 0.13 to 0.12 and that is all I did.
Follow the remaining instructions for creating a capture (upload your clean recording input file and your desired output file). Hit the play button and mine was done in 7 minutes.
It will spit out your file. Download that.
I uploaded that file to my tone3000 profile, and *POOF* It shows up in the A1 Legacy section! Now the Soran Tiny Stomp recognizes the file!
I do not know, but it should work for the other china pedals that use A1 models.
Is there a least stable Q-line color consensus? My experience is varied
Red worlds Q-line DD3: Pretty stable
White worlds DD3: Pretty Straight
Blue recent run DD3(I have two): straight to understable
White recent DD1 (I have two): straight to stable
Is there a market for clear discs? Looks like the Shield Club Notion release is clear, and the ‘regular’ release are colors. Where I play there’s brutal rough, and I’ve stayed away from clear.
Can standard A1 captures still be made on the NAM online site? Are there specific parameters to set to make sure it’s a standard, (not lite/feather/nano)?
There are a lot of V1 files available on Tone3000. How can I add a V1 I just made over to my profile?
TLDR: I finally got an I/0 box and made a Tone3000 account, to realize that’s not how V1 files are made. The Soran TinyStomp doen’t take A2 files yet. So, I figured out how to re-amp that noise signal and made a V1 file over at NeuralAmpModeler. How do I get it to the T3K profile?
Blackberries taste great tho…
Cosmic Fury 2 (distance, understable), glow C-Line P3X (controlled, straight), glow C-line P2X (shorter, more stable)
With a lot of pros throwing old runs of discs (Uli, Calvin, Gannon, etc.), I’m wondering if Rick just grabs handfuls of brand new discs off the shelf. If so, is that an advantage or disadvantage? I have no idea if he does or doesn’t look for ‘money runs’. It just seems like he throws whatever and makes them work.
Which pros generally throw new stock?
Venmo. All discs wear 7+/10 **Add $4 shipping per sale (even multiples)** Since one disc already sold, the lot is no longer offered.
Swirly S Pharaoh pop top 166g ink $15
Lucid Warden 175g ink $15
K3 Berg 174g (pre-HoD) ink $15
Diamond Wizard 175g $10
Proton Envy 175g ink $10 SOLD
Storm Barbarian 172g $8
300 A2 170g $10
Star Roc 176g $10
Anyone know if that is a dyed premium plastic or somehow dyed base plastic? It looks pretty cool. I only know ams who putt with premium plastic, so I’m guessing it’s base, but how is it dyed?
Here’s how FPO scored the first birdie hole 18 Sprinkle. Sweet!