u/ultravoxel — reddlx

ESPclock BIG [0.8" display]

Hello everyone, i want to share with you ESPclock, my W.I.P. digital clock based on 7segment display and (XIAO) ESP32 C3 / ESP8266 (wemos d1 mini).

I released this project 4 months ago, and since then i updated it with new features (some of them recommended by various reddit users).

My target is to build a digital clock that has the look and feel of a professional one, but that is extremely accessible (estimated cost is about 10€).

User can interact with it via webUI, and from there user can add Wifi credentials, NTP servers to retrieve current time, add an alarm and more.

The most relevant features from the latest update are:

- alarm clock mode with snooze feature. (requires a passive buzzer);

- added TTP223 touch button to turn off alarm when ringing;

- added Uptime;

- added ESPmDNS;

And last but not least, i added support for a bigger 0.8" display, which improves readability and has a better display-to-body ratio!

Of course i've designed a new minimal case for the new 0.8" display!

Hope that you'll like it! And I'd like to know your opinions/advices about it.

For more info, links to the project:

[PROJECT PAGE + Firmware + Instructions]

https://github.com/telepath9/ESPclock

[MAKERWORLD - ESPclock BIG ]

https://makerworld.com/it/models/2616382-espclock-big-digital-clock?from=search#profileId-2887323

[MAKERWORLD - ESPclock BOLD]

https://makerworld.com/it/models/2405754-espclock-bold-digital-clock#profileId-2637281

[MAKERWORLD - ESPclock standard]

https://makerworld.com/it/models/1594116-espclock-digital-clock#profileId-2069321

u/ultravoxel — 10 days ago

▲ 12 r/maker

Hello everyone, i want to share with you ESPclock, my W.I.P. digital clock based on 7segment display and (XIAO) ESP32 C3 / ESP8266 (wemos d1 mini).

I released this project 4 months ago, and since then i updated it with new features (some of them recommended by various reddit users).

My target is to build a digital clock that has the look and feel of a professional one, but that is extremely accessible in term of costs (about 10€).

User can interact with it via webUI, and from there user can add Wifi credentials, NTP servers to retrieve current time, add an alarm and more.

The most relevant features from the latest update are:

- alarm clock mode with snooze feature. (requires a passive buzzer);

- added TTP223 touch button to turn off alarm when ringing;

- added Uptime;

- added ESPmDNS;

And last but not least, i added support for a bigger 0.8" display, which improves readability and has a better display-to-body ratio!

Of course i've designed a new minimal case for the new 0.8" display!

Hope that you'll like it! And I'd like to know your opinions/advices about it.

For more info, links to the project:

[PROJECT PAGE + Firmware + Instructions]

https://github.com/telepath9/ESPclock

[MAKERWORLD - ESPclock BIG ]

https://makerworld.com/it/models/2616382-espclock-big-digital-clock?from=search#profileId-2887323

[MAKERWORLD - ESPclock BOLD]

https://makerworld.com/it/models/2405754-espclock-bold-digital-clock#profileId-2637281

[MAKERWORLD - ESPclock standard]

https://makerworld.com/it/models/1594116-espclock-digital-clock#profileId-2069321

u/ultravoxel — 19 days ago

▲ 26 r/arduino

Hello to everyone again!
You may remember my ESPclock project, a 3D printed smart clock made with a 7-segment display and XIAO ESP32 C3 (or Wemos D1 mini) that connects (via webUI) to Wifi and NTP servers to retrieve current time.

Well, in these months i've updated it with some new useful features (some of them were recommended by you!).

The most relevant ones are:

- alarm clock mode with snooze feature. (requires a passive buzzer);

- added TTP223 touch button to turn off alarm when ringing;

- added Uptime;

- added ESPmDNS;

And last but not least, i added support for a bigger 0.8" display, which improves readability and has a better display-to-body ratio!

Of course i've designed a new minimal case for the 0.8" display!

Hope that you'll like it! And I'd like to know your opinions/advices about it.

For more info, links to the project:

[PROJECT PAGE + Firmware + Instructions]

https://github.com/telepath9/ESPclock

[MAKERWORLD - ESPclock BIG ]

https://makerworld.com/it/models/2616382-espclock-big-digital-clock?from=search#profileId-2887323

[MAKERWORLD - ESPclock BOLD]

https://makerworld.com/it/models/2405754-espclock-bold-digital-clock#profileId-2637281

[MAKERWORLD - ESPclock standard]

https://makerworld.com/it/models/1594116-espclock-digital-clock#profileId-2069321

u/ultravoxel — 23 days ago

▲ 75 r/esp32

Hello to everyone again!
You may remember my ESPclock project, a 3D printed smart clock made with a 7-segment display and (XIAO) ESP32 C3 that connects (via webUI) to Wifi and NTP servers to retrieve current time.

Well, in these months i've updated it with some new useful features (some of them were recommended by you!).

The most relevant ones are:

- alarm clock mode with snooze feature. (requires a passive buzzer);

- added TTP223 touch button to turn off alarm when ringing;

- added Uptime;

- added ESPmDNS;

And last but not least, i added support for a bigger 0.8" display, which improves readability and has a better display-to-body ratio!

Of course i've designed a new minimal case for the 0.8" display!

Hope that you'll like it! And I'd like to know your opinions/advices about it.

For more info, links to the project:

[PROJECT PAGE + Firmware + Instructions]

https://github.com/telepath9/ESPclock