Sigenergy draws to much and flips mains
Hi all,
I have a sigenergy 48 kwhr battery with 10 kw inverter and 15 kw solar.
I’m having trouble where I’m drawing too much power through my 63 amp circuit and flipping the circuit protector.
Somewhere in the system it seems like it tops out at 14.6 kw draw from grid Ie if I plug the ev in to charge and set the battery to charge it will drop the battery charge down if there is not enough solar in winter to do everything by at once.
(Solar can be crap in winter.)
But it does not drop it enough. It still flips the grid circuit regularly.
I went through the settings and found where to set it to draw less max power. Ie drip it down to 12.6 kw or 55 amp. Ie something less aggressive so it won’t flip the grid breaker.
But these settings are greyed out.
Is there a way to set the max draw in such away that that I can set the EV to charge and it will dynamically drop the battery charge if the draw is too high ?
So I need to get those settings enabled?
I get 5 hours cheap electricity during solar soak.
I’m with amber and they briefly had control of the battery but I took it back…
Do I contact Amber or signeregy or my installer ?