Really happy with how this one turned out. Printed and hand-painted this Doom Slayer figure, including all the little details and finishing touches.
I also make custom prints from different models, and I’m always up for trying something new. If you’re a business or creator who needs printing, painting or finishing work done, feel free to reach out.
Hey everyone,
I'm currently looking at a used Bambu Lab A1 Mini (standalone, no AMS Lite) and wanted a sanity check on what a fair offer would be.
Details of the machine:
Model: Bambu Lab A1 Mini (Standalone)
Runtime: ~72 days of print hours (~1,728 hours)
Included Extras: 2 extra build plates [carbon fibre and sparkles] + power cable and stock accessories.
Condition: Cosmetically good, fully functional .
Given that brand new units run around [₹20,500 / $199], what would you consider a reasonable price to pay considering the ~1,700 hours of runtime on the motion system and extruder?
Would appreciate your thoughts on a fair buying range vs. a deal where I should just buy new. Thanks
Hi everyone, I’m new to 3D printing and just got my Bambu Lab A1 Combo. This is my first Benchy, printed using Bambu PLA Basic with the default settings.
Could you please take a look at the print quality and let me know if you notice any issues or areas that could be improved? I’d especially like feedback on the layer lines, overhangs, hull, chimney, and overall surface quality.
I haven’t done any manual calibration/tuning yet, so I’d like to know whether this looks normal for an A1 or if I should make any adjustments.
Photos attached. Any feedback is appreciated! 🙏
Hey I am new to this space, I’ve just had some stuff printed from someone providing a service and want to start out with actually purchasing a printer so I can try it out myself
I don’t have much of an experience or know where to buy them, i would prefer it being used and on the cheaper end but also slightly reliable
Please let me know if you have any deals or offers! Ill be active on the thread and looking out for offers
My current budget is around 10k
Can extend if i get a good deal
Been sketching on a flat tablet for months and my wrist was done with it. Printed this design to angle it properly and keep it locked in place while drawing — sanded and cleaned up the finish myself.
Printed on my Cobra Neo 2, PLA. Happy to share more shots or details if anyone's interested — also taking custom print orders if this is something you'd want for your own setup.
I've got a well used and well maintained a1 mini combo.
Asking price 20k or best offer
Location chennai F2f prefered/local pickup
Purchased august 2024
Print hours nearly 3800-4000
Camera unit does not work
I'm moving and can't take this with me.
450x450x450 custom cube enclosure with 2020 extrusion, handles, acrylic side panels with weatherstripping and magnetic door latch.
Top mounted 3030 extrusion swivel spool holders and a stripped down ams lite setup (so no rfid reading capability) but I can provide the original ams lite with rfid if preferred.
I've got a few spare nozzles .2 .4 .6 .8 all partially used and one 0.4 unused. There's also the peo/starry pattern build plate and the stock one with another unused fancy pattern build plate along with a smooth plate that has seen some limited asa prints.
Ive also got some spare silicone socks for the toolhead as well and one spare hardened steel extruder gear assembly, can throw some of my unopened filaments and a few meters of new ptfe tubes if needed to sweeten the deal.
UPDATE: To all the guys who have messaged me about buying it, I've replied to some of you individually but there's a bunch more and it's taking up too much time to reply so I'm putting this up here,
I've been convinced to hold on to it till everything else regarding me moving is finalised, so unfortunately I'll only reach out to the ones who've offered to match my price after that to discuss the specifics.
My apologies for getting you guys worked up like that but some of you were a bit over bearing in the DMs
What is the best place to buy the Bambu Lab P2S Combo in India in terms of price, after-sales service, reliability, and smooth delivery?
If anyone has already purchased a P2S Combo in India, please share your experience. Which seller did you buy from, how was the delivery, and how has the after-sales/warranty support been?
Also, what is the best price you've seen for the P2S Combo in India?
I'm currently comparing different sellers and would really appreciate some first-hand experiences before placing the order.
I placed it on the 15th. It hasn't been delivered yet but it is still marked as "Completed".
I will give them a call in the morning but I wanted to know if this is how they usually operate or is this cuz of the sale oooorrr .... am I screwed?
Hey all, got the new Bambulab P1s +ams 3d printer with holographic and textured build plates. new to this 3d printer and eager to try out new things.
I'm a cad engineer (not the artsy kind) and can design parametric stuff and print them out.
Custom prints and Delivery possible, Limited in filaments at the moment. Let me know what you need.
Added a few pics of some requests i already got.
Edit: Had no idea there was such a huge demand for Arthur Morgan!
Slide till the Last to see the Print (The design isn't mine)
I Got Order From one of the clients To make this so I had to join it up through glue and assemble it without any PDF it was Quite a hassle but eventually did it and made this
Totally Worth It !!
I'm looking for filament spool meter like this https://makerworld.com/en/models/2475096-universal-spool-filament-meter?from=search#profileId-2717899 for Numakers filament spools. The model says it is generic but I'm doubt its accuracy without considering the spool exact dimensions.
Anyone using any such meter model with better accuracy?
u/numakers why don't you provide model for such meter?
Hi Folks,
I’m looking for 3D printing service in Gurgaon. I need to print 40 challenge coins for an upcoming event on Sunday.
I have the STL files ready for front and back will be different prints and then will glue them together. Colour is black and white with black as base.
Size of one coin is 1.5 inches in diameter and 2.5 MM width for one side 5MM total width.
Please let me know if you can help.
Feel free to DM for photos, videos of it printing, or any questions!
Hey everyone, while printing a model, suddenly the filament started getting stuck. I opened the tube and cleared the filament and resumed the print but again same issue occurred. Meanwhile i noticed that once the print starts, the nozzle temperature is not retaining at 220 and start to cool down mid print which explains why filament is getting stuck.
Any ideas or suggestions what might be causing it?
Edit : i did put the silicon sock and cover back but it didn't help. Sorry for missing this detail before.
Hi All,
I have been having poor overhangs with Numakers filament, tried to change many settings, cooling, speed, volumetric speed etc but i just cant resolve it, so i started changing filaments and realized the following
Numakers PLA with (Bambu PLA Basicprofile and with Numakers PLA + profile) - Both results in poor overhangs starting at 40 degree itself, it starts sagging on the right edges! (Very Ugly).
Elegoo with Bambu PLA Basic profile no such issue till 70 , this is acceptable, wonder what is happening with Numakers
whats strange is Numakers PETG with numakers PETG profile does very good , till 80 i dont see any issues at all.
Initially i was thinking either my printer or a particular batch of filament, but i have tested with both old spool numaker PLA and new spool numaker PLA , both have the exact same issue
Check the images for detailed information
Green - Numakers OLD PLA
RED and Yellow - Numakers NEW PLA
Orange - Numakers PETG
Blue - Elegoo PLA
Anyone face such issue and know how to resolve this please
We run a small manufacturing setup in Indiranagar with a mixed fleet of Bambu and Creality machines. Got tired of waiting weeks for spares to arrive, so we started stocking them, and figured others in the city have the same problem.
What we're holding right now:
- Hardened steel nozzles — A1 series, P1/X1 series, H2S/H2D series
- High-flow hotend nozzles (H2D/H2S)
- Hotend heating assemblies
- Cables and smaller bits
More details at www.hanzof.store
Filament: we can source most common materials next day at the moment. Building up proper warehouse stock over the coming weeks so it becomes same-day.
Printing: if you don't own a machine, or yours is tied up, we've got capacity. PLA, PETG, ABS, ASA, PA-CF, PET-CF. Send a file, usually same or next day depending on size. We also source CNC and sheet metal if the part shouldn't be printed — happy to tell you honestly which it is.
We're putting together hanzof.store to make all of this less of a WhatsApp exchange. If there's a spare or a filament you're constantly struggling to get hold of in India, tell me in the comments — that's exactly what I'm trying to work out before we commit to stock.
Not trying to spam the sub. Mostly wanted to say the spares exist locally now, because I'd have wanted to know.
I'm stumped between the A1 and the A1 mini, i need some fresh perspective that can help me decide which one to get.
Pros of the A1 mini:
- smaller overall size of the A1 mini. Will be easier to make space for in my house or my room with limited space. it would also be easier to move to a new place when needed.
- costs 8k less
- i don't have to worry about the NTC issue present on the A1.
Pros of the A1:
- larger build area. this is where I am the most confused and need some help, i plan on printing mostly functional and organizational prints for around the house and don't really plan on making toys or figurines for the most part, so will the bigger build size be necessary for me or can i get by with the a1 mini?
Now I don't want to get the A1 mini and regret not spending the extra 8k for the A1, but also don't want the bigger footprint of the A1 if i can get things done on the smaller printer. Also the NTC issue aka the A1 caching fire issue scares me.
Suggestions on where to buy from in mumbai are also appreciated, based on my research I was looking at buying from WOL3d, but after reading about the negative experiences people had with Wol3d I’m now thinking of purchasing through Ideal3d
If i were to sell my H2S, how much do yall think i could get, 1155 hours on it, bought in november of 2025, good condition, if i was selling id also be giving, 2 coolplate super tac, 1 smooth plate, vision encoder, TPU feed assist module, 5 0.4mm, 1 0.6mm and 1 0.2mm, 2 0.4mm HF, 2 0.4mm TC hot ends. 2 ams 2 pro units and one AMS HT. just wondering for a price as i’ll be going aboard in 5-6months for uni and going to sell the printer eventually, i bought the H2SC from WOL3D for 1.7L
