r/Vz61

A design I have been working on to modernize the Skorpion a bit. Very happy with the outcome.

Built this old girl and finally got some ammo for it shot 100 rounds and it did great, but later noticed the barrel pin had walk itself out a little bit.

I did use a polish barrel I got awhile back from Arms of America so it was already cut for the pin, i also used a 3mm drill bit to clean the hole.

The barrel pin went in with just a few tabs, but seemed to be snug.

Y’all got any recommendations on what to do about it?

My first time printing with a nylon like pa6-cf other than a benchy right before this started and it came out so fucking nice. I basically can't see any layers and it's got a nice texture finish from the carbon fiber material. I plan on printing few different versions of the frame just to have on hand as it's super easy to put together with the ar15 lower fcg parts. I do want to print the ATRH version to keep the stock parts too and will once the FRT comes out for it which is very close to being done!!!

I posted my PLA+ 2.0 printed lower a bit ago which was just for testing and I was honestly intimidated in printing this material but I read a lot and prepared my printer settings and it payed off. I should get my FFL and sling printed lowers for 200 bucks!! I do want to start a printing business for gun parts (non FFL stuff), custom pieces, or super safety parts, hand guards, etc etc. But we will see how things go.

I'll post some pics and video of this baby test fire in a few days or so.

As the title says I’m searching for people in the Phoenix or surrounding areas with vz61s with different receivers so I can develop the frt to fit everything. I only have access to printed receivers and an Atlantic at the moment. I will need to remove the upper, remove the safety, take some pictures/measurements. Should take less than half an hour, I can come to you!

Looking to get my barrel threaded. What are your thoughts on using vz61usa to do it?

U/conclusionone222 vz61 brrrt in action. I'm going to put the rate reducer back in to see if it helps with the feeding issues I'm having, but additionally I had to take out the hammer stop pin. Later today I'll making some clearance cuts to see if it holds up

Who’s ready for a file drop? Works with and without the reducer
(Broken ejector, don’t mind the failure to eject)

Anyone have stl/step files for a selector switch? Have something else in the works and don’t want to have to order a bunch of surplus selectors lll

Hey everyone having feeding issues with my build. This is kit build on a tort tort receiver. Did the best I could to get a picture of the issue I’ve been experiencing. Round is getting hung up and causing bullet setback. Any ideas on what I should do?

Now I need a VZ58 stock. This thing feels dangerous to shoulder😂