Looking for some help.
Car is a 2016 limited
Car is running rough. Shop says they found the waste gate was disconnected on the turbo, and cylinder 1 spark plug was black. Car has also been throwing service stabilitrak warnings.
Shop says the engine is shot but the only evidence they have provided is the info I listed above and the codes in the ecm
P0299, p0300, u0109
What do you guys think?
SPECS:
Centrifugal pump rated for 13,200gph (220gpm)
pump is elevated 2 feet higher than top of the ponds water line.
pump is connected via 2" pvc sch40 pvc.
the input run from pond to the pump is at least 150feet. 2" pvc. It includes a backflow prevented and about five 90 degree elelbows.
The run back to the pond (output) is also 150feet via 2" pvc pipe. The output is level with the input on a different side of the pond.
There is also a high pressure bio filter and a UV system that is connected on the return line back to the pond.
More info:
Im currently dealing with a professionally installed 10,000 gallon pond that the pump setup just does not work correctly. i believe that the setup was planned out incorrectly. I am by no means an expert on these setups but from what ive been able to gather this setup should not work.
i can get it primed and get it running but the pump sounds like its eating rocks. The vibration from the cavitation is very concerning. I had originally suspected air leaking into the input, but i have sense pressure tested the input line and it holds pressure without issue.
Before I declare a system that was installed by a professional company as incorectly done, i would like some input from real people (not ai) that know what they are doing. I know next to nothing about these systems, so i would appreciate any help. i can provide more info if needed.
ps: The pump is a Sequence 13200pwr81
This style camping table is hands down one of my favorite additions to my camp gear. I put it right up there with the same importance as my chair and tent.
its quick to setup and tear down, and its light and pretty compact when broken down vs. other table options.
ive tried those fabric style tables, they excell at all the things ive mentioned here but they suck at actually being a table.
im a noob. I've had my printer for only a few months. I was hoping elegoo offered some asa cf or asa gf since I've had good luck running their default profiles for their other filiments. Unfortunately, it appears they do not.I understand there is a filiment calibration you can do, and I have messed with it before.
Im just wondering if anyone here has found a brand of asa cf or gf that seems to agree well with this printer? On the other side, are there any brands offering this type of filiment I should avoid?
For those curious, im printing parts for a boat. They will be exposed to heavy sun and obviously water. i do want them to be stiff, hence why im looking for cf or gf.