u/Automatic_Cress8396

▲ 18 r/VITURE

VITURE Luma Pro vs VITURE Pro 2 — my experience after using both

I’ve spent some time comparing the VITURE Luma Pro and VITURE Pro 2, mainly for gaming, and there are some differences that are quite noticeable.

Build quality

Both glasses are very well built. However, the Pro 2 feels slightly better built to me. It feels a little more solid and refined overall.

Image quality

This is where the Pro 2 wins.

The colors are still vibrant, but they feel more natural and controlled. The Luma Pro can sometimes have those very intense, almost fluorescent reds, whereas the Pro 2 looks more balanced while still being very vivid and contrasty.

Fine detail is also better on the Pro 2. The difference isn’t huge, but text is easier to read and small details in games, especially things in the distance, are easier to distinguish.

No black crush on both, and blooming is quite under control on both, maybe Pro 2 has slightly more blooming, but so subtle that is nothing to worry about.

Brightness

The Pro 2 also seems slightly brighter at maximum brightness.

However, both glasses get extremely bright, to the point where I don’t think brightness should be a deciding factor. The difference is there, but in actual use, both reach more than enough brightness.

FOV / perceived screen size

This is where I actually prefer the Luma Pro.

The Luma Pro feels like a larger screen overall. The advertised ~146” feels believable from my perspective. It has more of that big home-theater-screen feeling.

The Pro 2 feels closer to a ~125-130” screen. Maybe slightly closer to my eyes. It’s still very immersive. The 50º fov are real, it’s just my perception.

Interestingly, increasing the IPD on the Pro 2 makes the perceived screen feel somewhat larger, closer to the Luma Pro. However, I think this proves that is more of a perception effect rather than an actual noticeable FOV difference.

For immersion, I’d give the advantage to the Luma Pro, slightly.

Audio

Very similar overall.

Volume seems basically identical to me. The Luma Pro may have slightly more pronounced mids and highs, while the Pro 2 sounds a little flatter. Some people might prefer the Luma Pro as it might sound cleaner or clearer.

I wouldn’t consider audio a deciding factor between them tho.

Comfort

The Pro 2 wins here.

I’ve never had any comfort issues with the Luma Pro. They’re already very comfortable for me.

However, the Pro 2 feels slightly better, mainly because it’s lighter. The adjustable nose pads/bridge also make it easier to get a comfortable fit.

Edge clarity

Surprisingly, I see very little difference here.

I’m using the Pro 2 with the default nose pads and haven’t experimented much with adjusting them. Around 80% of the image looks perfectly sharp to me, while the remaining area is slightly softer.

However, if I move the glasses slightly closer to my eyes, I can get essentially the entire screen looking sharp.

So for me, edge clarity is basically a tie.

Heat

Neither gets particularly hot in my experience.

The Pro 2 doesn’t seem to heat up noticeably, but the Luma Pro wasn’t particularly warm either.

Lens darkness

This surprised me.

Even though the Pro 2 doesn’t have the electrochromic lenses, the lenses are very dark. I’d estimate they provide roughly 70–80% of the perceived darkness of the Luma Pro’s electrochromic lenses.

For me, this isn’t nearly as important a difference as I expected.

Latency — slight issue for me

This is the main reason I’m slightly hesitant about choosing the Pro 2.

Testing both with a PS5, the Luma Pro feels very slightly more responsive to me. Input feels instantaneous.

With the Pro 2, I perceive a small amount of additional latency, not much tho, as I’m really used to +240hz monitors so I notice small things like this.

Gaming comparison

For reference, the Luma Pro feels to me roughly like playing on my LG OLED C4 at 120 Hz with Game Mode enabled and the corresponding low-latency boost mode.

The difference in perceived latency between the two feels roughly like comparing input lag at 90–100 Hz versus 144 Hz on a monitor.

Keep in mind I only tried Grand Theft Auto V and Red Dead Redemption 2, capped at 30 FPS on my PS5, but that’s what I felt.

I don’t think this would bother most people tho, but latency is quite important to me and I’m really sensitive to it.

Overall

Honestly, I can’t decide which one is the better product.

The Pro 2 has several advantages:

  • Better overall image quality
  • Better fine detail
  • Slightly higher brightness
  • More comfortable
  • Excellent, more natural-looking colors
  • Slightly more solid build
  • Lower price

On the other hand, the Luma Pro has some advantages that can be equally important depending on what you value:

  • A more vivid and spectacular-looking image, which some people may actually prefer
  • More immersive perceived screen size
  • Electrochromic dimming
  • Magnetic connector
  • Possibly slightly lower latency, at least in my experience

So I genuinely think either one is a great option.

The Pro 2 feels like the more refined and balanced product, while the Luma Pro has a few characteristics that make it more appealing for immersion.

For me personally, I’m still undecided between the two.

reddit.com
u/Automatic_Cress8396 — 2 days ago
▲ 3 r/BenQ+1 crossposts

BenQ MH680 - Compressed air created dust spots. Should I try again or stop?

Hi everyone,

I recently bought a used BenQ MH680 projector for around €150. It was working perfectly and the image looked great.

I noticed some dust around the vents and thought it would be a good idea to clean it. I used a fairly powerful motorized compressed air machine and blew air through the intake and exhaust vents without opening the projector.

Lots of dust coming out, but then, after doing that, I started noticing dust/fiber spots in the image. They are mostly visible on solid colors (white, black backgrounds) and become very obvious when I intentionally defocus the image. Some of them look like tiny hairs or fibers.

Before cleaning it, I don’t remember seeing them, so I suspect I may have blown dust into the optical path or moved existing dust to a more visible location.

My questions are:

  1. Does this sound like dust in the optical path/DLP area?
  2. Has anyone successfully fixed this by blowing compressed air again, or is that likely to make it worse?
  3. Is a proper internal optical cleaning the only real solution at this point?
  4. If you’ve cleaned a BenQ DLP projector yourself, how difficult was it?

For reference, the projector is otherwise working perfectly, no overheating warnings, no dead pixels, and the image looks fine during normal content.

Thanks!

u/Automatic_Cress8396 — 2 months ago