Can anyone identify these connectors inside the Schlage Sense Pro?
Hi everyone,
I’m working on modding a Schlage Sense Pro and trying to identify the small gold RF/coax connector and the pinned connector used inside the lock.
I found some internal photos in the FCC filing, but the image quality is too poor to clearly identify either connector.
My goal is to adapt the Sense Pro to work with my mortise lock. To do that, I need to relocate the exterior reader higher on the door than the main lock assembly, which would also allow me to keep using the existing key cylinder if needed.
This means I’ll need longer cables, either by extending the existing ones or replacing them with longer cable assemblies. Before making any modifications, I’m trying to identify both connectors so I can find compatible extensions or replacement cables.
If anyone has a Sense Pro, especially one that is already disassembled, I’d really appreciate close-up, high-resolution photos of:
- the gold RF/coax connector, including both halves if possible;
- the pinned connector and wiring harness;
- any markings or part numbers on either connector.
Measurements of the connector diameter and pin spacing would also be very helpful.
Any photos or information would be greatly appreciated. Thanks!
