Ender 3 con guide lineari su X e doppio asse Z appena montato, estrusore metallico bowden, tutto calibrato al meglio possibile (cinghie, flusso, retrazione, junction deviation, pressure advance)
Pla basic eSun a 205°C a 40mm/s, retrazione 4mm a 45mm/s, ventola 100%
Filamento asciugato ieri per un giorno intero a 55°C
Non sono soddisfatto della stampa
*il video del non-funzionamento è sotto*
The problem is that the BL Touch (3D Touch) with a 3+2 connection (black and white on the Z endstop, black to the left and white to the right) with 2.1.2.8 doesn't work as it should, meaning when it touches the bed, it doesn't stop the descent.
I don't think it's a connection issue because trying the precompiled firmware on the BTT github (specifically the firmware for the SKR E3 V3 for BL Touch Z homing at https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V3.0/Marlin ) works perfectly.
I also tried with the physical endstop (same connection and 2.1.2.8 and it works).
All the posts, videos, and articles are outdated or use old versions, which makes me confused with the various versions, connections, and settings I see.
Has anyone else been in the same situation or can help me?
