Dpfi-mpfi d15b2-d16z5 obd0-obd1 swap quistions
Hi!
Ive got some questions about the swap cause I have Some problems with it.
Some info:
I have a 1991 ed (ef) Civic and it used to be a obd0 dpfi d15b2. I wanted to do a b20 swap and i am going to but I want to do that one proper so it Will take Some time, then my d15b2 gave up on me (its got 350K KM on the dash so its okay) but then a friend of mine said he had a d16z5 engine Ecu etc to do the swap for now sinds its quite similar to b20 engine Harness. Enough story telling here are my questions.
I am doing the swap with p07 ecu(obd1) obd2 inectors high impendance and obd1 distributor. I Also have the d16z5 engine harness. Now here is where the problem this has an extra connector on the passenger side. Next to the big round connector and rectangle. And that small 6 pin,6 wire, connector i still have to connect because that has the distributor signals. My question is where do i wire the signals to on my ecu?
I really want it to drive again so any info is appreciated ! 🙏
Thanks!!!!