u/Formal_Slide4162

My X1 Mini will not start up anymore unless I connect it to the power adapter. At that moment the battery charge reads 100% now. Still if I then remove the power cable from the device it suffers a hard shut-down, and will only be able to restart some time after I reconnect the external power, I was thinking about opening the device to disconnect the battery in an attempt to reset it, but can only find teardown schematics for the X1 (pro). Can anyone point me to a disassembly for the X1 Mini, or does anyone have any other solution in mind?

My X1 Mini will not start up anymore unless I connect it to the power adapter. At that moment the battery charge reads 100% now. Still if I then remove the power cable from the device it suffers a hard shut-down, and will only be able to restart some time after I reconnect the external power, I was thinking about opening the device to disconnect the battery in an attempt to reset it, but can only find teardown schematics for the X1 (pro). Can anyone point me to a disassembly for the X1 Mini, or does anyone have any other solution in mind?

Just, out of the blue, after several days of "uninterupted" play, had a severe lag-interuption again mid game, sending me into an island I normally would have missed, with my guns completely off target and the controller unresponsive for some time... It cost my team a cap, but maybe they can still salvage the win... Our other DD is dead in the middle of another cap and seems to have disconnected.... And I see our BB's missing their targets too. GMT+1 on PS5.

And now to find a build for it I like 😉

My K1C (Februari 2025) keeps switching off mid-print, somewhere between half an hour and an hour in, without any alerts or alarms. It's only able to be powered on again after a cool-down period.

I've done some testing:

- If I (only) heat up the hotbed (95°C), it will not switch off.

- If I (only) heat the nozzle (230°C), it will not switch off

- If I heat both the hotbed (95°C) and the nozzle (230°C), it will not switch off

- But, if I start a print (I tried it with different models) under those conditions, at some point the machine will completely shut off.

Does anybody have any idea what else I could check?

Only the pré-2019 T5 ships, in 7v7... I'm sweating already 😉