
Benchmade-SOTC
S30V Griptillian
M4 Bugouts
M4 Osborne
Had many Benchmade knives over the years, but these 4 are the ones stayed in the collection.

S30V Griptillian
M4 Bugouts
M4 Osborne
Had many Benchmade knives over the years, but these 4 are the ones stayed in the collection.
Additional images available upon request
Been looking for these pickles since Healthy Life Market went out of business and Kroger quit carrying the pickles. Is there a location in the Kanawha Valley, Huntington, Beckley, that sells them?
Additional images available upon request
Additional images available upon request
Additional images available upon request
Today while I was changing bits on a Wave Alpha the bit retention spring fell out. Fortunately I seen it fall and installed it back in the bit holder. The question I have are there a place where I can source replacement springs for the Alpha, Arc, and others models if the spring is different.
Additional images available upon request
Price: $130 Third owner, I don't believe it has been sharpened but has been carried, used, and disassembled. Blade and scales may have a few light surface scratches from use and handling and smudges from cleaning. Nice lockup and centered as well as a Manix 2 can be. No modifications and will include box. Now the ugly part, The lanyard tube is mangled on the clip side. This happened because I got the lanyard tube stuck in a set of Titanium scales and was impatient in my amateur attempt to remove it properly. if your incline enough, a 1/4" bar stock or drill bit reamed through the lanyard tube should round it back out.
Has anyone used this style clip on a Taichung knife? If so did the screw pockets and holes need modified. Also looking for something similar that would work on GB2 and Smock knives.
READ ME
Spyderco Para 3 LW MagnaCut Salt -- $100
Second owner, I don't believe it has been sharpened but possibly carried and used by previous owner. Blade may have a few light surface scratches from use and handling. Nice lockup and centered as well as a Para 3 LW can be. No modifications and will include box.
Spyderco Sage 5 SPY27 Factory Seconds -- $90
Second owner. Factory edge but I have used it and carried it as part of my EDC rotation. Lockup is good and blade is centered. No modifications and blade may have a few surface scratches from use and handling.
Built the Service Bronze today and figured I’d get the others out for a picture.
L —> R
Service Bronze
Plain Sandwashed
Dark Abyss
Plain Sandwashed
OD Green Creakote
Blue Blast Stonewashed
Plain Stonewashed
Northern Lights Metallic Anodized
Extra: Plain Sandwashed & Stonewashed
Does anyone have these milled clip, particularly on a GB2?
Is there any prompts y’all use for better renderings?
Love this knife but the action has been problematic since day one. It feels like the blade rubs the Micarta. Has a really gritty feel when actuating. Oiled the washers a few times and it helped for a short time. Today I used a very small amount Nano grease on the washers and pivot and it feels great. It still has a small amount of grittiness but it feels significantly better. I’ll keep tinkering with it though and see how the grease behaves until it needs further maintenance. Not really sure what the main issue is but it seems like the unfinished Micarta is wicking the oil away from the washers. If y’all have suggestions, I’d appreciate it.
Wasn’t sure what to expect with Cerakoted titanium scales. But I believe it came out pretty well and they will patina with scuffs and wear those battle scars proudly.