u/Independent_End8958

Un conocido me pidió una pieza para la valija de su moto que se le perdió. No encuentra el repuesto y mediante un escaneo 3D pensaba replicarla en 3D. Tengo una x1c y una creatbot d600 (600 x600 x 600mm) no sé si imprimirla por partes (x1c) o en una pieza en la creatbot. Además de que material podía usar? Que postprocesado necesitaría la pieza? (Además de pintado)

Dónde puedo conseguir filamento 3.00 mm para la creatbot en Argentina o Uruguay ?

Espero su respuesta. Muchas gracias

I friend of my ask me to make this replacement for he’s bike, is the saddlebag lid of he’s motorcycle.

I know I would need to make it by parts because is much larger than my x1c printing bed, but is my fist time printing something that larger and that needs to be resistant. What you suggest me to do? I use conector or not? And if so, what type? Also, what material did you recommend me ?

I add some photos of the original object.

I hope someone could help mi with this! Thanks

I been having a problem with mi x1c extruder, the printer print’s normally but some times the extruder just clogged and stops working, I noticed that the filament gets thicker in the part where the gear tightens, I thought that was the filament that i was using (Grilon 3 brand) but recently I have change the brand to Elegoo but I have the same exact issue, some times it just continues working after the repair but some times it clogged again, all the filaments that makes that problem are PLA. Also the nozzle, most of the time isn’t clogged. I add some photos of the problem. I wish someone can help me!