Hi! I am looking for a 60V brushcutter and/or trimmer like the dcbc581 that looks like a beast, but ai cannot find it in Canada.
Do you know if it is going to be available soon or if there is another model number in Canada?
Is there an alternative?
Cheers
While everything seems to be operational, there is not water that is collected by the unit.
Frost appears at lowest part of the back radiator and it rises very slowly. After more than 30 minutes of compressor activity, still no water dripping.
As soon as the compressor stops all the frost goes away very fast and produces just a few drops.
The controls seem to be all responsive
The ventilator works well and air intake is not impeded
The radiator has been vacuum dusted and seems quite clean
The compressor works also (outside tank temperature ~100°C)
Temp. @ the first sensor (~80°C)
Temp. @ the second sensor (~minus 3°C)
Inside temp. 20°C
Relative humidity level (according to the unit ~45%)
Brand : Gree
Model : GDN50AP-A3EBA1H
When I try to follow the heat through the copper tube that goes away from the top of the compressor, I am under the impression that it decrease very fast. It is unbearable hot at the top right (from behind perspective) and it gets quite tolerable at the first exit point on the top left of the part of the radiator which is the closest to the ventilator inside.
Does it mean that the refrigerant is not circulating properly?
Or that there is not enough refrigerant?
Should I try to shoot compressed air through the radiators?