Révision moto Suzuki

Bonjour ou bonsoir à tous.

Je viens ici en jetant un peu une bouteille à la mer, pour le contexte je possède une moto V-Strom 650 de 2011 qui va souhaiter ses 75000 km comme le constructeur le préconise je souhaiterais lui faire une grosse révision malheureusement celle-ci ne peut être fait que par des garages Suzuki ou agréé à ma connaissance le seul qui existe c'est celui présent au motoparc sauf que voilà les avis sur sa page sont un petit peu terrifiant ( ça va de simplement erreur de prix de plusieurs centaines d'euros jusqu'à des oublis de vis sur des plaquettes de frein ) j'aimerais donc savoir si par hasard certaines personnes ici avaient soit un avis à donner sur ce garage soit la connaissance d'un endroit où je peux emmener ma moto se faire réviser ?

Si de votre côté vous avez une Suzuki et que vous avez un endroit où je pourrais faire cette révision même en dehors de Montpellier ça ne me dérange pas de me déplacer merci d'avance pour vos réponses.

reddit.com
u/Killiancolasky — 3 days ago

Problem with the first layer of printing

Hello, good evening.

First, a little context: I'm printing with a Raise3D E2 using PLA and a Creality Ender.

Regarding the settings, I'm trying the standard Raise3D settings (see screenshot).

https://preview.redd.it/wbep7t8sd15h1.png?width=1049&format=png&auto=webp&s=cb094ecba46f7dc66460549b4ad80146b8193d04

https://preview.redd.it/jv8tiwkpd15h1.png?width=1039&format=png&auto=webp&s=579aedbebed819079579165d5e6246957ca50d7d

https://preview.redd.it/zxu2fq9qg15h1.png?width=1041&format=png&auto=webp&s=c82a51d65b8fbb3510a8dbf8211c914d8283f566

https://preview.redd.it/xxqgypdyg15h1.png?width=1037&format=png&auto=webp&s=7938f0fa8ddf6a56a8f2432cc7d790650fd22a8c

On the printing side I have 2 problems, 1 on the fill lines too long after a while it starts to peel off.

https://preview.redd.it/gzfb5dyce15h1.png?width=934&format=png&auto=webp&s=d33c3436c47e506ff80cea93f02c7f3abc88d10e

And the difference in level between the first layer and the two layers.

https://preview.redd.it/04cdifl3f15h1.png?width=1079&format=png&auto=webp&s=bd3254f548e20f2bf34baaf14e7963987735e81a

This is a printer on which we have quite a few problems and I am a bit stuck. In the past, I tried increasing the First Layer Flowrate thickness to 115% and the First Layer Extrusion Width Percentage to 190% following research on Google, which improved the aesthetics, but I still have the same problem of detachment.

https://preview.redd.it/gl725sj7g15h1.jpg?width=4000&format=pjpg&auto=webp&s=16e2d2978b9f69281da73d67c9ed51dd1292dbf7

So, if anyone has any ideas on how to improve these points, I'd be happy to hear them XD

Thanks in advance, and I'm available if you need any further information.

reddit.com
u/Killiancolasky — 3 months ago

Need help with a Vegapunk 01 / Shaka cosplay

Hello, good evening!

I've been cosplaying for a while, but I've mostly specialized in 3D printing and I've never really made a full costume myself (only a Natsu from the Fairy Tail Grand Magic Games, which was a failure, and some alterations here and there). But today I want to try and SUCCEED. The problem I had with the Natsu was the fabric choice; it wasn't suitable for many reasons, so I'd like some advice on that.

For the pattern, I was thinking of using a doctor's blouse pattern and adding a hood, and for the fabric, going with cotton poplin.

I'd like to have your opinion on all of this.

Thanks in advance for your replies! 😄

P.S.: English isn't my first language, so sorry if it's poorly written.

https://preview.redd.it/7zrhifmfug3h1.png?width=225&format=png&auto=webp&s=5b15e26301bd470492a6185892f1104344c799de

https://preview.redd.it/3dndsjvgug3h1.png?width=288&format=png&auto=webp&s=a65b8c7d66b9be01ffc9995c808e036893d410cc

reddit.com
u/Killiancolasky — 3 months ago