Guys i found this large thing on my rat and im so scared pf what it is, it appeared overnight or over two nights. I cannot go to the vet today since they are closed. Do you think he qill be okay untill tommorow?
Hi there! I've been trying to calibrate my CC2. I completed the temperature calibration for Professional Filament PETG and found that the best temperature is around 240°C.
Now I've moved on to the flow ratio, and these are my results (each step was 0.1). I can clearly see that +0.1 has the best full and smooth surface, apart from that one circle and the edges.
Do you have any ideas what the issue might be? Is it just over-extrusion, or could it be something else? Other than those spots, the surface is perfect.
I've also printed +0.05, which is attached in a separate photo.
Printer Elegoo CC2 , Elegoo slicer
Filament Pet-G
Nozzle temp 240
Bed temp 80
Cooling fan max 20%
Max volumetric speed 11mm3/s
Speeds around 160(outer wall) up to 250 (solid internal infill)
Acceleration 10000 outer wall 5000 travel speed 500
Hi there! I've been trying to calibrate my CC2. I completed the temperature calibration for Professional Filament PETG and found that the best temperature is around 240°C.
Now I've moved on to the flow ratio, and these are my results (each step was 0.1). I can clearly see that +0.1 has the best full and smooth surface, apart from that one circle and the edges.
Do you have any ideas what the issue might be? Is it just over-extrusion, or could it be something else? Other than those spots, the surface is perfect.
I've also printed +0.05, which is attached in a separate photo.
Do you think the +0,05 should be my go to or is there a way to eliminate the circle and edge issue on that +0,1?