u/Kraviken

All of a sudden now, my remote can only turn volume up or down in increments.

Before I could be at say, Volume: -10dB ..

Hold the volume up button and raise it smoothly to say, Volume: -5dB ..

Now when I do it. At -10, holding up, it goes to say -8, and then stops. And I have repeatedly tap the up button to get to -5 ... (Like e.g. I have to press it 5 times to raise it 2 steps.)

I have the original remote, google TV remote calibrated for NAD T758, and logitech elite with the companion remote.. So can't be a remote issue, they all produce the same result. Even when I hold the remotes directly infront of the newly cleaned window on the NAD directly infront of where the ir-sensor is..

What can I do to fix this?

It ran on batteries. And the car moved from the 'vibrations' of the road surface. It had a small steering wheel.

All I have is the pads that stuck under the micro machines cars. It came with two cars. But the pad could be taken off, (Was glued.) and put on any other car I had from before.

The pads has felt underneath to facilitate the motion on the surface.

I only have a picture of the pad.

It had exits, so could be linked with other sets if put side by side.

It had some flat buildings. At the upper edge. And the normal 3D buildings other places. I have seen the same buildings in other sets.

Anyone know what I am talking about? It is not the sets with actual tracks or bridges.

Problem with remote not being able to controll volume reliability.【NAD T758 V3i】