u/NecessaryOk6815

FLP-11 Onager- Absurd Long Draw Foam Blaster by shoelesshistorian | Download free STL model | Printables.com https://share.google/UetSUTZhVJK5VyIkf

Onager > MK-4X hands down. Silly me was just testing this on my car's litterbox and cracked it. Yes, I know, I'm stupid. But with how light this primes, and how crazy hard it goes, it was worth the trip to Walmart to get another litter box. This, by far, is the longest blaster I've built. It was easy to assemble and prints well. AMA about this. Enjoy another masterpiece.

Grand jury indicts woman, 24, in fatal Kailua shooting

Hilinaikailimakualopali Keeno, yes, that's her name

Here is the sniper W01F from Misplaced Moose.

Print Files Can be found here: https://drive.google.com/drive/folders/1jKAe3Vx47NcBtq51O6GERCvExpcxnjxo?usp=drive_link

Assembly guide here: https://youtu.be/hFqzelHxkaQ

Moose makes some seriously powerful blasters. Everything went together nicely. I self sourced, so I had to make adjustments to the plunger tube. It's not the standard size we normally use, so I had to improvise a little. The diameter of the plunger tube needs to be between 35mm and 36mm and about 6 inches long. Cut off any excess. If you use the recommended one from McMaster, you should have no issues. My tube was 1mm smaller ID so I used 2mm thick oring instead of the 123 oring. The prime is easy with full sized k25. I used 400mm barrel and was hitting lasers. The double stack mag works great. It was weird loading the data like it is, but it works without fail. I didn't have spacers in, but it was hitting quite hard with 3 ring bamboos. AMA about any of it.

Btw, the hardware for this is like under $40. Easier to buy from moose than it is to self source like I did.

SandPiper A2 Nerf Blaster “鹬”第二改型 软弹发射器 by YoursKatiaRomanova - Thingiverse https://share.google/oFUQaWIkr9N8ePQ7j

​

​

https://www.printables.com/model/1691519-scorpion-ontos-remix/remixes

https://www.printables.com/model/1735283-umoya-superbcar

Got help from u/DefyantM0ds with this build.

This is based on the 38/35PT version.

Easy to assemble, hits so hard (275 easy/consistent with super crappy chilis) with 1.8mm x 15mm x 250 spring. Prime is easy with this spring as well.

Used cheapy Aliexpress $6 rolls of Kingroon (orange is weird shades), but can't complain as it printed as well as the other brands. I used cheap amazon TPU on the butt for softer shouldering.

Trying out the new super BCAR, too lazy to put on 18 bearings, but hits straight just using the PCAR part of it.

AMA about this build. It took about 2 hours, but that's because I had to cut my tube and I got distracted. Best things about the ontos is the same same hardware m3 x 12mm button heads throughout.

Happy Nerfing everyone!