Clipping/Static-Noise after seemingly random amount of time Eonon E39X7S
I recently installed a brand new Eonon E39X7S, their flagship and first Android 14 Head unit. After driving for the first ~5 minutes a seemingly random audio bug occured for the first time, before that the radio sounded absolutely perfect. Sometimes the radio recovers itself, sometimes it needs ignition to be switched off and on, and sometimes it even needs a hard reset with a thin needle.
I updated all the software and ofc wrote their support which seemed helpfull at first, but just left me hanging since last wednesday.
I attached a video of the issue. There is also a filter+fuse box that is part of the short iso radio harness, which I did not use as I had my original radio in the trunk and used Eonons own A0590 extension, which does not have this box at all. I am unsure if I should cut it out of the short harness and integrate it into the 6m one. The original BM54 radio module is still connected inside of the trunk to the four-wired quadlock connector that is part of the extension. The two 17 pin cables in the trunk are unused.
I also did a VIN decode and my car does not have HiFi, nor the DSP. So the resler stick + IBUS App does not fix this issue, eventho I am already planning on installing it, but only after the radio works properly.
On a side note, the parking sensor visualization and the speedo in the main menu of the HU does also not work and i already ordered a newer canbux-box with PDC supported. It should arrive any day now, but I do not expect it to fix the audio issue.
