u/Opening-Abroad5738

First the LED turns blue, then it flashes yellow three times repeatedly. I checked the error code and it says: eMMC INIT FAILURE.

My Nintendo Switch works normally when I remove the modchip, so the console itself is fine.

I am using the V2 flex cable .The main problem is that I cannot get SP1 and SP2 to solder properly. Even after soldering, the flex can be removed very easily, as if it was never really attached. I have tried many times, but the solder does not seem to bond firmly to the pads

Any help would be greatly appreciated. Thank you!

First the LED turns blue, then it flashes yellow three times repeatedly. I checked the error code and it says: eMMC INIT FAILURE.

My Nintendo Switch works normally when I remove the modchip, so the console itself is fine.

I am using the V2 flex cable .The main problem is that I cannot get SP1 and SP2 to solder properly. Even after soldering, the flex can be removed very easily, as if it was never really attached. I have tried many times, but the solder does not seem to bond firmly to the pads

Any help would be greatly appreciated. Thank you!