Stock bucking. Stock 1J nozzle. All contact points were lubed with PTFE grease. It is 22°C. Mag filled with regular silicone-less green gas. With a room temp mag, it struggles to cycle full auto as well. After 2 bbs it fires dry and dumps gas out of the barrel and the bolt. Sometimes manages to feed a bb. It cycles perfectly in semi.
It's as if the pressure dropped severely after 2 full auto shots.
I just now seen a Sohei t-bag a shaman. More specifically, A FUCKING LVL 2 BOT. What brain damage must you experience to try annoying something that isn't alive. Arguing with a wall is more productive than that, a wall at least exists. He also had an unmuted mic, it sounded as if he was gnawing on the fucking thing the whole time.
There was also some Indian rambling audible in the background.
I am very close to purchasing a VMP-2, however I'm not sure how influential barrel length is in GBBs. The longer variant is only semi-auto, but has a higher power nozzle.
Will be printed by Creality Hi, 260x260x300 bed. In Sunlu PLA+.
Layer height: 0.32 (max)
Wall loops: 4
Infill: Rectilinear, 3% at 0°
​ Supports in image: Organic trees at 30° threshold angle.
Im using the Creality Slicer ​
For some context, it's an VSS Vintorez style stock I made for my Airsoft SVD.
​
I might consider splitting the print into parts, although I'd rather not. Printing flat is not an option due to screw threads just splitting into two upon greater exertion.
​