u/Pure-Broccoli701

Long story short I got a sonic pad and finally got it to work with my printer but I have had many inconsistent prints. my prints have a massive overextrusion (I think) and I have calibrated my e steps, printed from 190-220 calibrated my retraction from 5-6 mm and speed 40-60 mm/s, but I have not noticed any changes. Any help is appreciated

I have an ender 5 pro with a stock extruder, BL touch and Bowden tube set up with a Sonic pad. I use creality slicer and orca; both have the same issue

Long story short I got a sonic pad and finally got it to work with my printer but I have had many inconsistent prints. my prints have a massive overextrusion (I think) and I have calibrated my e steps, printed from 190-220 calibrated my retraction from 5-6 mm and speed 40-60 mm/s, but I have not noticed any changes. Any help is appreciated

I have an ender 5 pro with a stock extruder, BL touch and Bowden tube set up with a Sonic pad. I use creality slicer and orca; both have the same issue

Hi all.

I have my ender 5 pro with a creality 4.2.7 connected to my Sonic Pad at it was working fine until I got a “Touch failed to deploy” error on my screen. I checked the wires and they seem fine, has anyone had a similar issue and fixed it?

Hello there,

I am dusting up my old Ender 5 pro and getting it ready for printing when I moved the Nozzle Assembly in the X and Y direction, and man that thing is not smooth at all. To top it off it is making some really strange grinding noises when I move it back and forth and it halts movement when the wheels make a full 360 turn. It could be that my wheels are too tight or I have to replace the belts. Posted here for anyone with more experience to help me solve this issue

Hi all. I’ve been constantly flashing the firmware on my board so many times to reset it back from klipper to the default on creality but the lcd screen remains black. Is this because flashing it with klipper killed my screen or is it because it is not flashed correctly? I want to confirm also that if I flash a .bin on the board with the same file name it won’t work, that is the only thing that comes to mind that could solve my problem.

Ender 5 pro

Bltouch

Board Marlin 4.2.7