u/RiverRider48

I see people’s posts that their surgeon is the top rated surgeon in their area. I am curious who does these ratings and where you can find them?

I installed the 3 camera Furrion Vision S+ system on my travel trailer. I ran wires from the junction box under the front of the trailer to where the right and left cameras mount. The junction box contains the terminal strip the 7 way plug wires into. The cameras each have a wire marked trigger, which I connected to the left and right turn signal terminals respectively. The left camera will occasionally take full screen of the camera monitor when I turn the left turn signal on and the screen will return to the 3 camera view when I turn the signal off. This is the expected behavior. The right camera has never once behaved this way. I called Lippert, and they told me these will only work when installed on a Coach that comes prewired from the factory with the trigger wire. After a lengthy back and forth with the costumer service rep, he agreed to send an email to his supervisor asking if there is a wiring diagram from the camera to the 7way they can send me. We will see if they send anything.

Has anyone dealt with this? I am thinking it may require a diode or relay in the circuit.