It give me a R...(eject symbol) error when i insert a tape. I opened it up and found a small spring on one if the roller pins, but it still seems to pull te tape over the read head fine
I insert the bluetooth cassette and nothing happens. When i put the boombox in cassette mode it doesn't display anything on the Lcd. With the adapter in i am unable to press the play button. Any idea of what could be causing this?
The arc initiates at about 40mm, so about 70Kv? Also can i use a bunch of laden jars as capacitors and not use resistors because of their high ESR?
Pc specs: CPU- ryzen 5 7600 GPU- Radeon RX 7600 8gb for main display (1080p) and amd Saphire hd 5450 (the pink card) for the crt's RAM-32gb ddr5 6000 SSD-1tb WD blue
I mainly use the setup for 3d modeling, light gaming (minecraft and Beamng) and for loading games to my psp.
All the records are second hand the boombox i use for CD's and tapes. Both the Nokia's are functional, but the 3200 needs a battery.
Bet you guys can't guess my age
So I forgot to charge my Samsung galaxy s6 lite and when i tried to plug it in in started to do some sort of boot loop. The backlight just flashes on and off if i plug it in and doesn't respond to any button presses. It happened on one other occasion and i just left it on charge for a few weeks and it just started up again, but there has to be a better solution, right?
So my Jeep is contantly needing spark plugs,but only in cylinder one. It runs for a little while and the it starts to misfire on that cylinder. After that the plug seems to be entirly broken.And I am sure is the plug because I swaped the plugs between cylinders and the problem followed the plug. The olny time it works is if I hold the cable a small distance from the top electrode of the the spark plug so that it arcs from the wire to the plug.Any suggestions?