Struggling to find this info, I'm building a custom case so I won't be using the 120mm/140mm conversion brackets.
I imagine the dimensions for bottom mounting is the same as the rear mounting, but could someone confirm the spacing of the screw holes please?
I finished this about 9 months ago, posting before I rebuild to fix some issues with the first design.
This all started when I found that the Lego round plates with holes in fit 16mm perfectly.
Performance wise this works great, the reasons I'm changing the design is that the res fitment is too tight and with the DDC pump it is much louder than I thought it would be. Also I didn't design this with repairability in mind, so I'm redesigning preemptively.
I'll post the Lego PC 2.0 when I'm finished.
Specs:
5800X3D
3090 FE
4x8GB 3600Mhz C14 RAM
2TB SSD
3x 280x45mm rads
I finished this about 9 months ago, posting before I rebuild to fix some issues with the first design.
This all started when I found that the Lego round plates with holes in fit 16mm perfectly.
Performance wise this works great, the reasons I'm changing the design is that the res fitment is too tight and with the DDC pump it is much louder than I thought it would be. Also I didn't design this with repairability in mind, so I'm redesigning preemptively.
I'll post the Lego PC 2.0 when I'm finished.
Specs:
5800X3D
3090 FE
4x8GB 3600Mhz C14 RAM
2TB SSD
3x 280x45mm rads
I'm looking at ordering a company car and the site we use to order lists both an 82Kwh and an 84Kwh for every Elroq model.
Most things I've seen online state the vRS being 84 and other models being 82, but ordering direct off of the Skoda website states the exact opposite. Does anyone know which one the vRS will come with if I order one now?
I'm looking at making my own MORA setup for my PC, hopefully having it around 2m away from my PC.
I'm looking at only using one d5 pump that will be in the main PC case, so I don't need to worry about longer cables for them.
I'm using 3x 280mm rads so 6x140mm pwm fans that will be connected to a sata powered fan hub.
I would prefer to have it still powered by the PC, is there a limit to cable length to supply enough power?
I'm designing my own watercooled SFF case that's going to have an external radiator setup.
It's going to be open air, but currently there are no fans at all in the main case.
Do I need a couple of 40mm fans or something over the VRMs or would open air be enough?
I'm looking at designing a custom SFF case with an external radiator setup, but unlike a MORA I'm looking at using two pump res combos inside the case.
One immediately before the radiators and one immediately after, with the radiators being maximum 2m away.
Are there any issues that could appear configuring it like this?