So I would love to get the M2 speed, unfortunately they do not import the good one here in the states. So what I did was buy the M2 and going to start converting it. Probably go with Briley’s since they do so much with them. My problem is a want a specific part and can’t find it. It’s the X barrel connector like in the picture. Anyone know where to get one.
Actually had my gun and barrel and reloading supplies for a long time. Just started getting back Into it. Life happened. My son has a 8.6 8 in barrel I made some 300gr yesterday. They fire great in his with the can on not so great in mine. It’s a 16 inch Faxon barrel with a can on it. I honestly didn’t think it would in mine. But dang I need more options and it’s a heck of a round. We were just shooting into the dirt and a 6x6. Here is a picture of the recovered bullets. Original 300 left. Middle through the wood. Right in the dirt. Here are the results I measured trice.
So to the guy that decided to make these. May 10000 fleas infest your bed tonight. GRRRRRR. Good thing my Dillon’s die punches right through it.
Before anyone says get a full sized mill. I don’t have the room or need for that. I was looking at adding a mini mill to my shop for help with my business. It will 95% be used for drilling holes in 1x2 and 1.75x1.75 aluminum tubing. I already have a drill press, it’s just not that steady with drilling a 3/4 hole. What are some good ones to look at and bad ones to stay away from. Was looking at a MechMaxx 7x27, with dro. I was looking at Grizzly ones the same. Any others around that size. And definitely needs to be 120v.
We had a fundraiser match for Special Olympics and raised over 3000$ for them. Great day and great match. And 2 Alpha on the swinger.
@the_ugly_stand Instagram
Www.Theuglystand.com.
Folding target stands. Will be at area 6 local matches or can ship.