Newbie guidance
Hello Pros,
Hoping to get some insight here. I bought 3 Tapo DL130 smart locks. Unfortunately, they don't have an option to buy sets with like keys.
After doing a little Googling, it has been determined that the Tapo lock set uses the Schlage SC1 key configuration. I bought a Schlage pin set from CLK and went to town. After replacing the pins and putting in the key the first time, it wouldn't budge. My heart sank. But after learning it takes a little finesse, the lock does actually work although I do need to pull the key out ever so slightly to get the pins to engage.
I went ahead and measured the pins that came with the lock and the pin set. They come in at .113. The pins in the set come in at .115. Is there a way to get this lock to work without having to finesse the key?? I've tried messing with the nut depth. It's in as far as it will go and backing it out only makes it more difficult to open.
Looking for additional ideas. Thanks in advance!!