u/Yaro672003

So here's my question and it's regarding the character Van Ark... In season 9 there is a version of him running around within the story that they explain was cloned (?) Or grown back from leftover cells (?)

Either way, what do we think? Is he truly a clone? And in that case like only affected by the events that occur in his life to make him who he was or could be?

Or do we think this is more like a Deadpool situation where he was just reconstituted and he's basically the same person?

I've recently gone back to the app after a while and decided to jump right back into where I was. That just happened to be halfway through season 9 and I'm unclear if I've listened to and or finished seasons 10 and 11.

So I did do a search and found an older post from 3 years ago with one through eight but it appears on my newer model which I bought in the last year the menu has changed slightly....

Here is what I think the current manual is...

https://ride1up.com/wp-content/uploads/2023/04/CDC6-Manual-20230414.pdf

​P01- Change unit to miles or kilometers

Use M for next... Use the stock password of 1919 to access this...

P02- This is where you set the wheel size. Leave this at 24.

P03- Turn on/off a start up password. This feature is not available.

P04- Turn on/off the cruise control function. To set the cruise control while riding, simply hold "+" for 3 seconds.

P05- Set the amperage for the bike. This cannot be changed. Even if the number is changed, the amperage will stay at the controller's pre-set level.

P06- cycling mode switching 0 for class 2 and 1 for class 3

P07- This tells you the firmware version the bike is running.

Currently F2.4

​P08- This tells you the hardware version the bike is running.

Currently H3.0

P09- Set the start up password(?) This feature is not available

P10- no is the default but can switch to yes... I did confirm that if it's yes it resets all the menu options back to default

So I did do a search and found an older post from 3 years ago with one through eight but it appears on my newer model which I bought in the last year the menu has changed slightly....

Here is what I think the current manual is...

https://ride1up.com/wp-content/uploads/2023/04/CDC6-Manual-20230414.pdf

​P01- Change unit to miles or kilometers

Use M for next... Use the stock password of 1919 to access this...

P02- This is where you set the wheel size. Leave this at 24.

P03- Turn on/off a start up password. This feature is not available.

P04- Turn on/off the cruise control function. To set the cruise control while riding, simply hold "+" for 3 seconds.

P05- Set the amperage for the bike. This cannot be changed. Even if the number is changed, the amperage will stay at the controller's pre-set level.

P06- cycling mode switching 0 for class 2 and 1 for class 3

P07- This tells you the firmware version the bike is running.

Currently F2.4

​P08- This tells you the hardware version the bike is running.

Currently H3.0

P09- Set the start up password(?) This feature is not available

P10- no is the default but can switch to yes... I did confirm that if it's yes it resets all the menu options back to default