Hi all, I know most people don't care much about quality. But I have this side hobby where I try to get the most out of every tape/recording that I find . I have high-end equipment and methods, so this is my latest effort. Hope you like. Sadly not complete concert, but some of the missing songs can be found on EJ official channel. Although they may be hidden for some reason.
So I am generally happy with CB, ,because I dont print very often. But when I do, it seems to always snap every first time. It happens especially with some of the more fragile filaments like PLA or ABS which are fire retardant. Also it happened with regular PLA I believe . But this did not even bother me as much except for yesterday. I left a 3 hour print over night with ABS again, and in the morning I woke up to see it had failed /snapped again. So I tried to reload it and it just wouldn't extrude. To my dismay, I had to learn the procedure to dismantle hot end. Which was really not on my agenda of things to do in the mornings. I have noticed the snapped piece had somehow melted into the heatsink filament path. I basically had to drill through it with a small bit to get it off. Has this ever happened to you guys? Because I see this printer does not have any sensor for when filamanet is not coming out, it just keeps "printing" with nothing. My theory is that as it was so hot for 3 hours, the heatsink heated enough to melt the filament and then it cooled off and got fused in the pathway. But when I booted it, it would not melt because the heatsink hole is not normally THAT hot. So yeah, if this happens you will have to disassemble the extruder and drill through the hot end...
So I forgot my klarna code and I went into their app where it says "change the code". When I pressed it it asks for the current code, which I forgot. I was stuck in a loop, so I contacted the customer service and they told me to try X amount of things, which were in the tune of - "Try to close the app, log in again. Try to reinstall the app" . They were just following standard playbook. I get it. But then none of it worked and I was just still stuck in the same situation as before. Eventually she said they can't help and there is nothing else they can do. So this is it then? I basically have to either remember the code or deal with it?
Yes , I know there is usually a way to log in with the email and all. I did that, but I wanted to confirm my identity for the klarna-card, and that one demanded my klarna-code with no alternative. So since I don't remember it, I can't even confirm my identity now. This is ridiculous to me. Has anybody had this issue?
Hey everyone. I have several dreamcasts I was going to sell. They are japanese imports so I needed some type of PSU for it. Since I have already designed one for 3do, I went to do the same for a Dreamcast. It will work from any 12v, 2.5A+ adapter. I know there are already loads of them available, but I don't care :D have ordered 10 pieces , 5 for myself and 5 I will probably list for sale. It can have DC jack or USB-C (Or both). I am a EU seller and I was thinking about 40 euros per PSU. I have used modern parts and closely followed manufacturer's recommendation for PCB placement. Anyways, if you anyone is interested ,let me know. I should have them in 2-3 weeks.
*The middle spot is meant for separate pcb I will add post-manufacturing*
*The boards I ordered will be black in color , the example is just in white so you can see better*
