u/cromanik

Pozdrav, imam pitanje vezano za ispostavu računa prema Slovenskoj firmi.

Dakle ja moram ispostaviti račun za uslugu najma opreme (moze i za glazbeni nastup)
Ali me zanima na koji nacin se to radi, imam PDV id njihov i svoj.

Ali oni mi tumače da za ispostavu računa za usluge bi morao biti u sustavu Pdv-a.

Dali ima netko sličnog iskustva?
Hvala

I’m looking for ideas for a cleaner setup for my two-keyboard rig.
I want to run a single 10 m cable from my keyboard stand to the mixer/power source, instead of having multiple separate cables running across the stage.

Ideally, the loom would contain:
2 × IEC C13 power cables for the two keyboards
4 × 6.3 mm jack audio connections from the keyboards
4 × XLR outputs going to the mixer

So basically, one neat cable loom that carries both power and audio for the entire two-keyboard setup.
Does anyone know of an existing product like this, or have a better idea for how to build it? I’m especially interested in solutions that are reliable and flexible enough for regular live use.

Pozdrav, tražim preporuku za kupnju zračne puške.
Želio bih uzeti što kvalitetniju pušku koju mogu legalno nabaviti bez prethodnog odobrenja MUP-a, odnosno da bude u kategoriji za koju nije potrebna dozvola.
Koji model biste preporučili i na što obratiti pažnju pri kupnji?
Pokušao bih se zadržati u nekom rangu do 500€
Treba mi za stakore..

Bok, otvorio sam obrt i u olanu je otvaranje i webshop-a, dakle dodao bih djelatnost prodaje preko interneta ali za to mi treba MTU, odnosno poslovni prostor za skladištenje proizvoda.

Mislio sam prenamijeniti garazu u poslovni prostor i to bi me koštalo nekih 2000€, treba projekt, elaborat za struju itd.
Međutim, pročitao sam da tada moram plaćati komunalije kao poslovni subjekt i to da je dosta skuplje.

Ne znam koja bi mi bila alternativa, jer plaćanje najma nekom fulfillment centru opet nije bas jeftino a i ne treba mi jer nemam puno proizvoda.

Ili možda da prijavim djelatnost izrade i prodaje rukotvorina, tu mi ne treba skladište, a da svejedno prodajem nesto drugo?
Pa prodajem 10% rukotvorine, a ostatak nešto drugo.

Hvala na pomoći.

Hi everyone,

I have a Yamaha CSP-170 Clavinova, and one key occasionally plays much louder than the others, even when I press it with the same force.

The issue is always with the same key.
It returns normally, doesn’t stick, and feels identical to the other keys.
I’ve already tried turning the piano off and on again, but the problem remains.

Has anyone experienced this with a CSP series or another Yamaha digital piano?
Does this sound like a faulty key sensor, dust under the key, or something else?
Is there anything I can try before taking it to a service center?

Thanks in advance!

Pozdrav, nakon 2 godine silikon u tušu je vec sav crn on pljesni i trebao bih ga zamijeniti.

Molim vas preporuku za neki silikon da ne dođe tako brzo crn ako je to moguće i isto tako preporuka za najlakse skidanje postojećeg.

Hvala.

Hi everyone,
I’m 30 years old, 6’1” (185 cm), and about 220 lbs (100 kg).

I want to start working out and build a good physique, but going to a gym isn’t really an option because the nearest one is quite far away.

My goal is to lose some body fat, build muscle, and improve my overall fitness.
I’m a complete beginner when it comes to structured training.

One thing I’d like to mention is that I can afford equipment, but I dont want to buy a lot of gear just to have it at home.
I’d rather invest in a few things that are actually useful and necessary for making good progress.
My main question is: Do I really need a weight bench to build a good physique at home, or can I get great results without one?
If you were starting from scratch and wanted the most effective setup without filling your house with equipment, what would you buy first?
Adjustable dumbbells, kettlebells, pull-up bar etc.
Thanks for any advice!

Hi, I have two 10W RGB laser projectors that have the following connectors on the back:
ILDA DB25F IN
ILDA DB25F OUT
ILDA-NETLINK (RJ45)

I would like to understand how I can properly control both lasers.
What do I need in addition to a laptop (interface, hardware, cables, etc.) to run them via ILDA or network control?
Also, what is the simplest and most cost-effective way to create and run laser shows for them?
I’m looking for beginner-friendly software that is not too expensive, but still reliable enough for live shows or synced music playback.
Could you please explain the basic setup and recommend an affordable software + hardware combination for controlling both lasers?

Thank you.

Pozdrav, možete li mi preporučiti neki 5G router?

Imam Internet preko A1 ne preko kabla ni optike nego samo njihov router i kartica koja ide unutra međutim ruter ima vec neku godinu i vise ne radi kako treba nego se tu i tamo pogasi pa ga moram resetirat da opet proradi itd. tako da moram kupiti novi..

Vec kad kupujem novi htio bih nesto da mi radi kako treba.
Imam dvije etaze, na jednoj ruter a na drugoj wifi extender pa mozda neku opciju da radi na oba kata dobro.

Jos jedna opcija, nemam ugovornu obvezu pa dali netko zna ako potpišem ugovor dali dobijem i ruter njihov novi?
Hvala.

Pozdrav,
Ima li netko iskustva s izradom željeznog boksa za psa?
Planiram raditi vanjski boks za njemačkog ovčara, s krovom i zaštitom od sunca pa me zanima koliko vas je okvirno ispalo i što preporučujete.

Zanimaju me dimenzije koje imate, okvirnu cijenu svega.
Ako imate preporuke za materijal/panele u Hrvatskoj.
Svaki savjet je dobrodošao :)

Hvala.