u/drkshock42

i didnt encounter this with the included lancer mag or if i did i dont remember but i did test it before stretching the bolt catch springand i was able to shoot all 3d rds in semi. didnt test full auto. the other mags that are said to work good ore double eagle stanags and tm mags (assuming i can find 30 rd mags) i the lancer mags work fine but they are really meant for the cgs. i changed the zet plate to a jager precision titanium plate. i tried a gm spring. i tried the Velcro loop side mod (which made then only lock in then they felt like it) the only thing that worked was stretching the stock mag catch spring but thats a band aid. so should i gest de stanags or tm mags instead depending on what i can find

all I was able to get at the time I got my ghetto blaster was gm mags. The feed lips sit taller. The only thing I did was I added a unicorn nozzle to use a npas. They're supposed to better than gm which was out of stock. I need it at 0ft med. Anyways what happens mostlybwithbgm.ags is the premature lock back..I upgraded the zet plate to a jager percision titanium zet plate and stretched the spring.i aloo tried a gm spring but it had the same issue as before stretching the spring. I heard about the Velcro mod but that caused only the included emg lancer systems mag to lock in but gm mags only lock in 5% of the time even if I give the bottom a good slap. I tried a gm bolt catch spring and it was still happening. Didn't do that with the stock spring but a stretched spring is only a bandaid. What else should I try

all I was able to get at the time I got my ghetto blaster was gm mags. everyone suggested tm, gm or de stanags. for some reason the de pmags are dogshit. The feed lips sit taller. The only thing I did was I added a unicorn nozzle to use a npas. They're supposed to better than gm which was out of stock. I need it at 0ft med. Anyways what happens mostly withgm mags is the premature lock back. I upgraded the zet plate to a jager percision titanium zet plate and stretched the spring. I heard about the Velcro mod but that caused only the included lancer mag to lock in but gm mags only lock in 5% of the time even if I give the bottom a good slap. I tried a gm bolt catch spring and it was still happening. Didn't do that with the stock spring but a stretched spring is only a bandaid. What else should I try

from what i can tell delta is decepticon and diamond is autobot. there supposed to be updated. i just was to know everyone's thoughts between the 2023 and 2026 design. should i go with the old or new design. How do they compare. In terms of performance.

the only things i did t wit was unicorn nozzle (supposed to be better than gm), feda npas, jager precision zet plate and stretched the bolt mag catch spring. i tried the included lancer mag (for some reason my ghetto blaster included a lancer mag and not a de stanag which are next to impossible to find much like tm mags (unless you were going the the Vietnam m16a1 look). i heard some not so good things about those as they are really meant for the cgs but they do work in the mws just fine). from what i head the feed lips are taller. the gm mags were just what i was told to get and i was only able to get them from dyanatech at the time.

from what i can tell delta is decepticon and diamond is autobot. there supposed to be updates version but before i buy an auto bot i just was to know everyone's thoughts between the 2023 and 2026 design. should i go with the old or new design

i have a noveske ghetto blaster (still need to find a permanent fix to the premature lock back. i have the spring stretched but i also tried a gm spring and that didn't work. I'm tying Velcro next)and i want to see of i can use my 4's. the stock bucking cant do it. best it can do is probably .32's which is common for stock buckings. i run a friction pro in my sr25. but still need to see if the mr is better. it gets a group the size of a soda can base at 100 ft. of course gbbr's are a different ballpark. all my pistols use decepticon since they're really designed for accuracy and not range but if I'm using my sidearm they got too close. I'm new to gbbr's and I'm not sure which bucking to get so which one is better

I just paid $90 for 2 cans of green gas. I bought asg ultra air and elite force fuel because I need to find wat works best. I found swiss air to be easy for me to use but they're sold out of lubricated green gas . I would bu buy they didn't have only cancer testicle's super high pressure gas only seriously. 170 psi and 200 psi. Why don't they have a 120/130 psi. Imo green gas is green gas but if it's lighter than 159 psi it's not green gas. Infact 150 psi is borderline red whichhbis realleant for gbbr's I alsoncoundtnnfje nuprol 2.0 on amazon. The plastic nozzle seems to line up better. And since I have a gbbr I'm going though more gas. Most of the cost was shipping.last time I bought gas online it was half that. $30forbgas nd $15 for Shipping. I reccomend you get an addapter and silicon oil and deal with the smell and fill the resivoir every 5 mags

Unfortunately the printer ban passed in ca. Theyvrevined it at the. Last minute and passed it. It was going to expire if theybdidntYou now need something open source. It's not just "ghost guns". It's also a potential copyright nightmare. . I hate suggest you get something open source by March 1st, 2029 or how you can still buy a skr mini and build it in a cave with a bunch of scrap.

I have a noveskee ghetto blaster and a common issue is premature lock back. After identifying the bolt catch spring installed it. Place of the original I had streached. Thinking gm mag means use gm spring. And it wnt back to behaving before I made the initial repair. I have a jager percision zet plate. I don't think it does this on the lancer mag. I'm a little short right now and tm mags can be hard to find. I'll have to check if dynatech has them or my local shop. So after all of that why am I still locking back before last round.

I bought a pdi inner barrel smsince I could fine a lambda 410 mm inner barrel and it's a bitch to get on. I managed to get it on but ibthing one of the contributing factors on why I had difficulty with it is it was a 75 °.I had laying around and I'm using this in my sr25 which is within the parameters if ,a 75° degree but if course 70° degree is also fine. it's just what I have. I'm just seeing if can't get 1.88 j on .4's. so do theybwork.

im in search of the best mags that song explode on me and feed flawlessly in a cyma sr25. what seems to happen iwht a couple of my syma mags is a bb will get between the sin and follower and cause a jamand when i take it apart themag explodes on me cand gets tangles and they are a bitch to untangle. battleaxe 220rd mags dont feed well in my sr25. i know pts is supposed to be good i tried filing but it doesn't drop free and i need to argue with it to get it out. i did try filing and that had minina effect. so what's the best way to get them to fit since filing had minimal effect

im not sure if this is specific to gm mags but i know its a common problem. my ghetto blaster locks back with a round still in the mage. my reloads were "fuck you mp5's you ar".i didn't realize this until i cleaned relubricated it since i thought that was the problem. if i hit bolt releas the bolt goes forward. iknow jager persion said to streach the fix but thats abadndaid. i want a permanent fix. any suggestions