u/gray1g

Image 1 — Worms Racing coil packs.
Image 2 — Worms Racing coil packs.
Image 3 — Worms Racing coil packs.
Image 4 — Worms Racing coil packs.
Image 5 — Worms Racing coil packs.
Image 6 — Worms Racing coil packs.
Image 7 — Worms Racing coil packs.

Worms Racing coil packs.

Fitted the Worms Racing coil packs this morning, I was still running the first generation 2 piece coils. To be fair, they were like new when I removed them, and the car was running fine with them at 55k, but I was getting the infotainment glitch,(explained in the pictures) and at that mileage and running a Jb4, thought it was only a matter of time before they might start giving me grief. After fitting these I'm pleased to say, said glitch never happened once this morning so that's all good. 🎶😎😁

An extra splash of red in the engine bay is always an added bonus as well 👏 ❤️ 👍

And what a difference in how much easier it is to install cylinder 3 with the 1 peice coil! I wormed that 2 piece bitch out and the new one slipped in easier than a KY jellied🍆! 😳 🤦 😂

I've pictured the only tools used, a ¼“drive wabble extension and a universal joint 10mm socket. You can see the rounded end of the extension compared to the square end of a standard one, using that and the universal jointed socket gives you enough manoeuvreability to easily access the coil bolts without removing the intake manifold. ✅ 👍

u/gray1g — 6 days ago

Worms Racing coil packs

Fitted the Worms Racing coil packs this morning, I was still running the first generation 2 piece coils. To be fair, they were like new when I removed them, and the car was running fine with them at 55k, but I was getting the infotainment glitch,(explained in the pictures) and at that mileage and running a Jb4, thought it was only a matter of time before they might start giving me grief. After fitting these I'm pleased to say, said glitch never happened once this morning so that's all good. 🎶😎😁

An extra splash of red in the engine bay is always an added bonus as well 👏 ❤️ 👍

And what a difference in how much easier it is to install cylinder 3 with the 1 peice coil! I wormed that 2 piece bitch out and the new one slipped in easier than a KY jellied🍆! 😳 🤦 😂

I've pictured the only tools used, a ¼“drive wabble extension and a universal joint 10mm socket. You can see the rounded end of the extension compared to the square end of a standard one, using that and the universal jointed socket gives you enough manoeuvreability to easily access the coil bolts without removing the intake manifold. ✅ 👍

u/gray1g — 6 days ago