I’m completely new too this. Been using Codex to try to write python codes and browser automated techniques to scrape vins from Autotrader. It always gets shut down by their bot detection. The only way I’ve got results is codex doing it internally on its own browser, but because of Autotrader limiting batch sizes, it takes forever to scrape even a decent amount of vins. Any help would be appreciated.
I’m doing a manual swap on my ‘21 Q60. I’m using MrDIY canbus shield with the ESP32. My goal is to use the rev match gear sensor on top of the trans to show the gear on the factory gauge cluster. I found the ID’s that show the current gauge on the cluster, but the factory TCM overrides it instantly, causing it to flicker back and forth.
Then I decided to try something simpler like changing the drive mode since it’s a physical on/off switch. Same thing, as Savvycan is sending the frames, it just keeps flickering back and forth. Tried unplugging the switch to see if the switch was overriding got the same results. I’m pretty new to this, so any info or a direction to go would be appreciated.
I need the logo converted to SVG file for printing on a bigger banner. Need the logo and then underneath the logo have “USEDHORSEPOWER.COM” in the font from the second pic. $15 paid, thanks in advance!