Use my referral code for one free month of Starlink Service when you sign up using my referral link.

https://www.starlink.com/residential?referral=RC-3931564-20287-65

Click the link above when you are ready to order. The Starlink website will flash a confirmation that you are using a referral code when you arrive at the website. Order your Starlink, and you will be credited with one free month of service that is automatically applied about 30 days after activation with the service active for the full period. The credit will be applied to your 2nd month's bill.

I bought the Bluetti elite 100 v2 a few months back as a dedicated UPS for my computer monitor, router and switches. With everything on it maxes out right around 300 W. Unfortunately today, when the power dipped for about 5 to 10 seconds my Amazon echo and my computer monitors all went dark, which means that the 10 ms switch overtime in reality was not realistic.

I can’t have that so should I just hang an APC or cyberpower ups off the end of the Bluetti units now? I don’t trust it at this point for proper UPS backup. I also had an elite 30 version two in my bedroom and that also rebooted the Amazon echo and that was supposed to have a 10 ms transfer time as well. I used to use only APC and Cyberpower true UPS and thought these power stations that are marketed for sub 10ms ups would be better. I figured longer runtime and time between replacement also longer. But they simply don’t do what I need them to do. I tossed 8 old UPS units and spent a lot to swap in all new power stations only to have to hang a real UPS off each one now.

I don’t need the longevity in my use case as much as the ups as I have backup generators for the home. So essentially I only need 15 seconds of runtime. Yes power stations were overkill in this context but if they did proper ups as they claim I felt it was just a margin of safety if generators failed

Use this link below to receive one FREE MONTH of Starlink Service. You must click the link and sign up during the same web browser session to get the free month applied. This is my personal code and does not expire. When you click the link, you will see a confirmation at the top of Starlink’s page that a referral code is being used. This confirms your free month. Be sure to sign up during the same session to be certain you get the free month of Starlink.

https://www.starlink.com/residential?referral=RC-3931564-20287-65

If you leave the Starlink webpage and then go directly to Starlink to sign up later, the referral code might no longer be active in your browser session. If so, come back here to use the link or store it on your device for future use. You can always tell if it shows at the top of the page that you are using a referral code when you first arrive at the Starlink website

Use this link below to receive one FREE MONTH of Starlink Service. You must click the link and sign up during the same web browser session to get the free month applied. This is my personal code and does not expire. When you click the link, you will see a confirmation at the top of Starlink’s page that a referral code is being used. This confirms your free month.

https://www.starlink.com/residential?referral=RC-3931564-20287-65

Active Starlink referral code for one free month of service.

Use this link below to receive one FREE MONTH of Starlink Service. You must click the link and sign up during the same web browser session to get the free month applied. This is my personal code and does not expire. When you click the link, you will see a confirmation at the top of Starlink’s page that a referral code is being used. This confirms your free month. Be sure to sign up during the same session to be certain you get the free month of Starlink.

https://www.starlink.com/residential?referral=RC-3931564-20287-65

If you leave the Starlink webpage and then go directly to Starlink to sign up later, the referral code might no longer be active in your browser session. If so, come back here to use the link or store it on your device for future use. You can always tell if it shows at the top of the page that you are using a referral code when you first arrive at the Starlink website.

https://www.starlink.com/residential?referral=RC-3931564-20287-65

Active Starlink referral code for one free month of service

Use this link below to receive one FREE MONTH of Starlink Service. You must click the link and sign up during the same web browser session to get the free month applied. This is my personal code and does not expire. When you click the link, you will see a confirmation at the top of Starlink’s page that a referral code is being used. This confirms your free month. Be sure to sign up during the same session to be certain you get the free month of Starlink.

https://www.starlink.com/residential?referral=RC-3931564-20287-65

If you leave the Starlink webpage and then go directly to Starlink to sign up later, the referral code might no longer be active in your browser session. If so, come back here to use the link or store it on your device for future use. You can always tell if it shows at the top of the page that you are using a referral code when you first arrive at the Starlink website

https://www.starlink.com/residential?referral=RC-3931564-20287-65

EXTENSION WEBSITE: https://velocityextension.com

Install page on Chrome Webstore: https://chromewebstore.google.com/detail/velocity-universal-video/dincpppfoklnhdjpnnkapijelkboooio

I wanted an HTML player that truly worked across all websites using HTML5 players. Existing players worked only on YouTube or a few sites. My extension has full control up to 16X speed, adjustable increment jumps, per-site exclusions, shortcuts, a video overlay of the controller, speed setting syncs with native speed controllers, mouse-wheel control for speed, auto-start speed, default speed settings per site, and much more.

This release is 1.1.6, and it has been iterated on and tested thoroughly for months, to the point where I'm ready for non-family and friends to have access to it.

IT'S FREE. NO SUBSCRIPTIONS. NO CATCHES. NO TELEMETRY. NO ADS.

I've been developing software for 31 years now, and I decided to make this when the speed controller extension I was using got updated and broke, and kept resetting back to 1.0x speed. There are many speed controllers out there, but if any can do everything, this one can. I have not found it yet. This was a huge upgrade, as that controller really only worked on YouTube. So I built this based on my wish list, but felt no reason not to share it with the world and give back.

I actively support and develop my software, and hopefully, if you download, install, and use this extension, you will see the care I took in building its interface and functionality. My goal is for this to be the last and only speed controller a person will ever need.

If you have any issues, suggestions, or bugs that come up lmk. I try to get easy releases for fixes out within 24 hours. Some websites change their DOM rapidly and could require small updates when that happens to continue working 100% on that particular website.

https://preview.redd.it/6d7rdcg2jx7h1.png?width=870&format=png&auto=webp&s=12a210553bdceb8b2e35118a9e43e8b8577d4d44

Referral link for One Free Month of Starlink Service!

🛰️ Get One Free Month of Starlink Service!

Here is my validated referral link that awards you one free month of Starlink residential service — no expiration.

How it works:

• Click the link below and sign up during the same browser session
• You will receive one free month of Starlink service 30 days after activation

👉 Claim Your Free Month of Starlink Service

https://www.starlink.com/residential?referral=RC-3931564-20287-65

Referral link for One Free Month of Starlink Service!

🛰️ Get One Free Month of Starlink Service!

Here is my validated referral link that awards you one free month of Starlink residential service — no expiration.

How it works:

• Click the link below and sign up during the same browser session
• You will receive one free month of Starlink service 30 days after activation

👉 Claim Your Free Month of Starlink Service

https://www.starlink.com/residential?referral=RC-3931564-20287-65

I know that DeepSeek allows sending images to their API because I do it through the Claude CLI and I’ve tried everything to get it to work using Zed using both the built in deepseek as well as creating my own agent in the settings.json file and enabling image to true and all the other necessary settings I think for the agent, but it always comes back and says images are not supported. I’ve tried both OpenAI and Anthropic compatible.

Has anybody been able to figure out how to get said to allow images to be pasted in for a DeepSeek model?

I read about Reasonix in a newsletter this morning and just finished checking it out. Seems like it could be one of the best (or the best) CLI and desktop companion implementations to use with DeepSeek. Fully optimized and solely built for DeepSeek to maximize and leverage it's particular capabilities and architecture.

Has anyone tried it yet? I'm shocked I haven't heard more about it, and I can't find much on Reddit yet. It's climbing on Github w/8000 stars as of this morning and 400+ forks.

Homepage: https://esengine.github.io/DeepSeek-Reasonix/index.html

According to Reasonix:

A DeepSeek-native coding agent, for your terminal.

Reasonix talks straight to api.deepseek.com. The loop is append-only, engineered around DeepSeek's byte-stable prefix cache — long sessions hold 90%+ cache hit and input-token cost collapses to ~1/5. Terminal-first, leave it running

8000 stars on Github. Open Source. MIT License

https://github.com/esengine/DeepSeek-Reasonix

Looks like it has everything skills, plugins, memory, slash commands, MCP, etc..

I'm going to install it and test it this afternoon, but if anyone has any experience with it or tips, post them up here.

Is this the holy grail tool to use with DeepSeek or maybe at least until DS builds their own?

I upgraded to Proxmox 9 and now FWG+ shows nine different mac addresses all for the same ip ending in .150. I cannot route outside to the internet unless I turn emergency access on for the main proxmox host now. What would be causing all the duplicate IP's now after the upgrade? Is it the firewalls or bridges on the VM's? and why is FWG blocking all traffic unless I enable emergency access now? Any tips where I can look to track this down and fix? thanks!

I have a really old Asus laptop running 22.04 but it’s tired and worn. It was touch screen which I don’t use. I hate the keyboard feel. What are best laptop options or mini pc options I could pair with a monitor in 2026. I don’t need a beat this is mostly for home lab and tinkering plus some typical usage like web browsing.

Recommendations?